Amplifier
BCIT-BAJA·BCIT-BAJA-DAQ·Revision01/Hardware/Amplifier/Amplifier.kicad_pcb
About the Amplifier PCB
Amplifier is an open source PCB design by BCIT-BAJA, published on GitHub. It is a 2-layer board measuring 27.5 × 8.8 mm, with 10 components from 7 distinct parts.
Other key parts include the INA333AIDGKR and TLV9061SQDBVRQ1. By type, the board carries 6 resistors, 2 ICs and 2 capacitors.
It belongs with the audio and rf & radio designs in this gallery.
From the project
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension. As well as collect other data such as linear/angular acceleration.
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension. As well as collect other data such as linear/angular acceleration.
There consists of 2 parts of this project.
PART B the amplification of the (-15-15mV) analog strain signal to (0-3.0V) which is then routed to
Main components on the Amplifier
Amplifier bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA333AIDGKR Texas Instruments | INA333AIDGKR_SOP65P490X110-8N | U1 |
| 1 | TLV9061SQDBVRQ1 Texas Instruments | TSOT-23-6 | U2 |
| 2 | CL21B104KBCNNWC 0.1uF Samsung Electro-Mechanics | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 3 | MCU08050D1001BP500 1K +-0.1% Vishay / Beyschlag | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4 |
| 1 | MCU0805MD4990DP500 500 ± 5% Vishay / Beyschlag | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | RG2012P-203-B-T5 20K +-0.1% Susumu | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | RG2012P-103-B-T5 10K +-0.1% Susumu | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
Amplifier design files
The KiCad project lives in the BCIT-BAJA/BCIT-BAJA-DAQ repository on GitHub; these links point at the commit this page was built from.
Amplifier: common questions
How big is the Amplifier PCB?
The Amplifier measures 27.5 × 8.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amplifier?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amplifier design files?
From the BCIT-BAJA/BCIT-BAJA-DAQ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amplifier design in my own project?
The repository has no license, so all rights stay with BCIT-BAJA. Use it as a reference, and ask the author before reusing the design.
More boards in BCIT-BAJA-DAQ
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687