Power supply
About the Power supply PCB
Power supply is an open source PCB design by BeeHive-org, published on GitHub under the MIT license. It is a 2-layer board measuring 45.5 × 48.5 mm, with 14 components from 11 distinct parts.
Other key parts include the LM2596T-5.0/NOPB. By type, the board carries 7 connectors, 2 diodes, 2 capacitors, 1 IC, 1 inductor and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
BeeHive: a flexible open hardware platform for behavioural experiments
In this folder users & collaborators will find designs and considerations about the hardware parts being developed in this project.
The pin mapping of the ESP32 controller and our board can be seen here:
Using table 2 of this manual we can see all the options for each pin.
Main components on the Power supply
Power supply bill of materials (BOM)
14 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596T-5.0/NOPB LM2596S-5 ITO-220 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | 455-2249 Conn_01x02 JST | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 2 | 455-2247 Conn_01x02 JST | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3 |
| 3 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J5, J6 |
| 1 | USB_A | USB_A_Wuerth_614004134726_Horizontal | J7 |
| 1 | 1N5822-E3/73 LED Vishay | LED_D3.0mm | D1 |
| 1 | D_Schottky | D_DO-201_P15.24mm_Horizontal | D2 |
| 1 | RLB0914-330KL 33µH Bourns | L_Radial_D10.0mm_P5.00mm_Neosid_SD12_style3 | L1 |
| 1 | 16ZL680MEFC10X16 680µ Rubycon | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | EEU-FM1E221 220µ Panasonic | CP_Radial_D8.0mm_P3.80mm | C2 |
| 1 | 560 | R_Box_L13.0mm_W4.0mm_P9.00mm | R1 |
Power supply design files
The KiCad project lives in the BeeHive-org/BeeHive repository on GitHub; these links point at the commit this page was built from.
Power supply: common questions
How big is the Power supply PCB?
The Power supply measures 45.5 × 48.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power supply?
14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power supply design files?
From the BeeHive-org/BeeHive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power supply design in my own project?
Yes, under the terms of its MIT license, which BeeHive-org chose for the repository.
More boards in BeeHive
Training board v02
100 × 100 mm71 parts2LMIT13
Spike n hold
63 × 110.5 mm55 parts2LMIT13
ESP32Beehive
117.9 × 110 mm48 parts2LMIT13
ESP32Piezo amplifier
188.6 × 95.9 mm39 parts2LMIT13
Hbridge driver
71 × 45.5 mm31 parts2LMIT13
Ir sensor
45.5 × 71 mm29 parts2LMIT13
Hp led switch
45.5 × 71 mm24 parts2LMIT13
12 24 boost converter
45.5 × 48.5 mm17 parts2LMIT13
Solenoid driver
45.5 × 48.5 mm17 parts2LMIT13
8 switch array
45.5 × 48.5 mm14 parts2LMIT13
Grove adaptor panel
72.1 × 46.8 mm3 parts2LMIT13
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k