Cotuca painel

Belquer·Cotucatronics·kicad/cotuca_painel/cotuca_painel.kicad_pcb

Cotuca painel PCB layout, top view — open source board by Belquer

About the Cotuca painel PCB

Cotuca painel is an open source PCB design by Belquer, published on GitHub. It is a 2-layer board measuring 176 × 36 mm, with 23 components from 18 distinct parts.

By type, the board carries 7 connectors, 6 resistors, 5 capacitors, 2 transistors and 1 switch.

It belongs with the test & measurement and audio designs in this gallery.

From the project

Modular firmware for sound-sculpture instruments.

Modular firmware for sound-sculpture instruments. The core idea is that the same brain runs any sculpture: the instrument code is board-agnostic, and changing hardware means writing one new file — not rewriting the system.

1. HAL boundary. No vendor #include outside hal.cpp. main.cpp, params, macros and manifests do not know which board they are running on. The board is chosen with make BOARD=daisyseed. 2. Normalized parameters. Everything is 0.0–1.0 in one central table; the manifest is what translates to Hz, seconds, dB. 3. Macros. One physical knob can move several parameters, with weight…

Cotuca painel bill of materials (BOM)

23 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SI2302CDS-T1-GE3
AO3400A
Q1, Q2
1
61202621621
IDC 2x13 femea <- cerebro
J1
1
53047-0710
OLED SSD1309 2,54mm 7p
J2
1
B2B-XH-A
fio -> arcade AZUL freeze A
J3
1
B2B-XH-A
fio -> arcade AZUL freeze B
J4
1
B2B-XH-A
fio -> arcade BRANCO buzios
J5
1
B2B-XH-A
fio -> LED do arcade A (1=A, 2=K)
J6
1
B2B-XH-A
fio -> LED do arcade B (1=A, 2=K)
J7
2
PTV09A-1020S-B103
10k lin
RV1, RV2
1
EC11E15244G1
EC11 — o unico encoder
SW1
1
2200U/35V
100n COLADO ao cursor
C1
1
100N
100n COLADO ao cursor
C2
1
EEU-FR1C101
100u 16V
C3
1
100N
100n
C4
1
47U
100n COLADO ao IDC
C5
2
100R gate
R1, R2
2
10k pull-down
R3, R4
2
100K
100R serie (~30 mA)
R5, R6

Cotuca painel design files

The KiCad project lives in the Belquer/Cotucatronics repository on GitHub; these links point at the commit this page was built from.

Cotuca painel: common questions

How big is the Cotuca painel PCB?

The Cotuca painel measures 176 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cotuca painel?

23 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cotuca painel design files?

From the Belquer/Cotucatronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cotuca painel design in my own project?

The repository has no license, so all rights stay with Belquer. Use it as a reference, and ask the author before reusing the design.

More boards in Cotucatronics

Similar boards