HardLabs

Bevi

BenjaminJAnderson·Orthodox·Hardware/PCB/references/bevi-main/bevi.kicad_pcb

Bevi PCB layout, top view — open source AVR/Arduino board by BenjaminJAnderson

About the Bevi PCB

Bevi is an open source AVR/Arduino PCB design by BenjaminJAnderson, published on GitHub. It is a 2-layer board measuring 361.3 × 97.6 mm, with 165 components from 14 distinct parts.

Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 81 LEDs, 80 diodes, 2 connectors, 1 IC and 1 switch.

From the project

You can find acrylic sandwich case file here

You can find acrylic sandwich case file here

This design may be reproduced, modified, and manufactured for Personal Use Only and not for Public Sale, however I allow to anyone who want to do small GB for their community for maximum of 10 pieces of this PCB per group buy.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Bevi, from the project README
From the project README

Main components on the Bevi

ProMicro

Bevi bill of materials (BOM)

165 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ProMicro
U1
1
USB_B
J1
1
Conn_01x04
J2
1
SW_PUSH
SW1
64
MX-NoLED-reverse
MX_0_0, MX_0_1, MX_0_2, MX_0_3, MX_0_4, MX_0_5, MX_0_6, MX_0_7 +56
2
MX-NoLED-reverse
MX_3_1, MX_7_7
1
MX-NoLED-reverse
MX_5_1
2
MX-NoLED-reverse
MX_5_7, MX_7_1
1
MX-NoLED-reverse
MX_6_7
7
MX-NoLED-reverse
MX_8_2, MX_8_6, MX_8_7, MX_9_1, MX_9_2, MX_9_5, MX_9_6
1
MX-NoLED-reverse
MX_8_3
2
MX-NoLED-reverse
MX_8_4, MX_9_3
1
MX-NoLED-reverse
MX_9_7
80
1N4148
D0, D1, D2, D3, D4, D5, D6, D7 +72

Bevi design files

The KiCad project lives in the BenjaminJAnderson/Orthodox repository on GitHub; these links point at the commit this page was built from.

Bevi: common questions

What microcontroller does the Bevi use?

The Bevi is built around the ProMicro, from the AVR/Arduino family.

How big is the Bevi PCB?

The Bevi measures 361.3 × 97.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bevi?

165 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bevi design files?

From the BenjaminJAnderson/Orthodox repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Bevi design in my own project?

The repository has no license, so all rights stay with BenjaminJAnderson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bevi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Orthodox

Similar boards