Minimal board

BennetLeff·temper·power_pcb_dataset/corpus/minimal/minimal_board.kicad_pcb

Minimal board layout, top view — open source board by BennetLeff

About the Minimal board

Minimal board is an open source PCB design by BennetLeff, published on GitHub under the Custom license license. It is a 2-layer board measuring 50 × 30 mm, with 4 components from 4 distinct parts.

Other key parts include the LM358. By type, the board carries 2 resistors, 1 IC and 1 capacitor.

From the project

a breville control freak ++

Temper is a consumer induction cooker built around three pillars: an ESP32-S3 firmware with an 8-state transition-table machine handling real-time power control and hardware-latched protection circuits; a KiCad PCB design optimized through a custom CP-SAT-based signal-integrity and thermal-aware placer pipeline; and a Python/Rust placer toolchain (CP-SAT solver, geometry/DRC/DSN/IPC crates, workflow DAG) that automates layout and checks placement against IPC standards. Protection — over-current, over-voltage, thermal shutdown, UVLO — is designed to be hardware-latched with firmware monitoring.

Minimal board, from the project README
From the project README

Main components on the Minimal board

Minimal board bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM358
U1
1
100nF
C1
1
10k
R1
1
4.7k
R2

Minimal board design files

The KiCad project lives in the BennetLeff/temper repository on GitHub; these links point at the commit this page was built from.

Minimal board: common questions

How big is the Minimal board?

The Minimal board measures 50 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Minimal board?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Minimal board design files?

From the BennetLeff/temper repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Minimal board design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in temper