Kicad orchestrator
berjer1e·kicad-orchestrator·examples/calculator/Calculator.kicad_pcb
About the Kicad orchestrator PCB
Kicad orchestrator is an open source AVR/Arduino PCB design by berjer1e, published on GitHub under the MIT license. It is a 2-layer board measuring 130 × 90 mm, with 90 components from 14 distinct parts.
Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the 74HC165 and 74HC595. By type, the board carries 32 switches, 32 diodes, 11 resistors, 5 capacitors, 3 ICs and 1 crystal.
It belongs with the power & battery designs in this gallery.
From the project
100% AI-Generated KiCad 10 MCP Server (22 tools) & 5-Agent Hardware Orchestrator Plugin with Calculator PCB Reference Project
The flagship hardware project in ./examples/calculator/ is a complete KiCad 10 rechargeable desktop calculator board featuring:
- MCU & Core: ATmega328P-AU + 16 MHz (HC-49S) crystal oscillator with 22 pF load capacitors and 100 nF decoupling - Display Mezzanine: LCD1602 I2C interface (JLCD1 JST-XH / header architecture with mechanical & Z-clearance audit) - User Input: 32-key 4x8 tactile switch matrix (SW1..SW32, 6x6 mm) with 1N4148 anti-ghosting diodes (D1..D32) - Power & Charging: HW-373 TP4056 Li-ion USB Type-C charger (UCHG1, 2.0 mm edge overhang) + MT3608 boost converter (UBOOST1) +…

Main components on the Kicad orchestrator
Kicad orchestrator bill of materials (BOM)
90 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC165 | DIP-16_W7.62mm_Socket | U1 |
| 1 | 74HC595 | DIP-16_W7.62mm_Socket | U2 |
| 1 | ATmega328-P | DIP-28_W7.62mm_Socket | U3 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | Y1 |
| 3 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J_BATT1, J_PWR_IN1, J_SW_PWR1 |
| 1 | I2C_LCD1602_4P | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J_LCD1 |
| 32 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24 |
| 1 | MT3608 | MT3608 | U_BOOST1 |
| 1 | TP4056_HW373 | TP4056_HW373 | U_CHG1 |
| 32 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2, D3, D4, D5, D6, D7, D8 +24 |
| 2 | 22pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 3 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R10, R11 |
| 8 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9 |
Kicad orchestrator design files
The KiCad project lives in the berjer1e/kicad-orchestrator repository on GitHub; these links point at the commit this page was built from.
Kicad orchestrator: common questions
What microcontroller does the Kicad orchestrator use?
The Kicad orchestrator is built around the ATmega328-P, from the AVR/Arduino family.
How big is the Kicad orchestrator PCB?
The Kicad orchestrator measures 130 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad orchestrator?
90 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad orchestrator design files?
From the berjer1e/kicad-orchestrator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad orchestrator design in my own project?
Yes, under the terms of its MIT license, which berjer1e chose for the repository.
Can I test firmware for the Kicad orchestrator without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k