OrcaPi

betulependule·OrcaPi·pcb/orcapi-hat/orcapi-hat.kicad_pcb

OrcaPi PCB layout, top view — open source board by betulependule

About the OrcaPi PCB

OrcaPi is an open source PCB design by betulependule, published on GitHub. It is a 2-layer board measuring 62.1 × 89.7 mm, with 66 components from 21 distinct parts.

By type, the board carries 30 capacitors, 19 connectors, 10 resistors, 2 ICs, 2 modules and 2 diodes.

It belongs with the robotics & motion, dev boards & breakouts and sensors designs in this gallery.

From the project

A Raspberry Pi-based bot project

The robot is assembled and programmed for maze traversal where the maze is represented with a black line on the floor (a textile 50 mm wide duct tape is recommended). The robot follows the left-hand wall follower algorithm and maps the maze as it traverses it. It assumes the maze is in the form of a grid. Once it finds an object in the maze, it picks it up and heads to the exit. The object used in this implementation was a 20 cm tall polystyrene duck. The settings of joint coordinates may need adjusting when using a different kind of object. If, while heading towards the exit, the robot…

OrcaPi bill of materials (BOM)

66 components, 21 distinct parts.

QtyPartRefs
2
~
U1, U2
1
~
A1
1
~
A2
12
Conn_01x01_Socket
J1, J2, J3, J4, J5, J6, J8, J9 +4
1
Conn_01x04_Socket
J7
1
Conn_02x20_Odd_Even
J14
1
Conn_02x08_Odd_Even
J15
3
Conn_01x03_Socket
J16, J17, J19
1
Conn_01x07_Socket
J18
1
5A
F1
1
~
D1
1
LED
D2
12
10uF
C1, C4, C6, C7, C11, C14, C16, C19 +4
15
100nF
C2, C3, C5, C8, C10, C13, C15, C17 +7
3
100uF
C9, C12, C20
1
36k
R1
2
20k
R2, R5
3
100
R3, R6, R10
1
12k
R4
1
5k
R7
Show 1 more
QtyPartRefs
2
4k7
R8, R9

OrcaPi design files

The KiCad project lives in the betulependule/OrcaPi repository on GitHub; these links point at the commit this page was built from.

OrcaPi: common questions

How big is the OrcaPi PCB?

The OrcaPi measures 62.1 × 89.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OrcaPi?

66 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the OrcaPi design files?

From the betulependule/OrcaPi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OrcaPi design in my own project?

The repository has no license, so all rights stay with betulependule. Use it as a reference, and ask the author before reusing the design.

Similar boards