Emotion engine
bhavanasrinamthabad1809-hub·emotion-engine·emotioncontroller/emotioncontroller.kicad_pcb
About the Emotion engine PCB
Emotion engine is an open source ESP32 PCB design by bhavanasrinamthabad1809-hub, published on GitHub. It is a 2-layer board measuring 96.1 × 95.3 mm, with 21 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-S3, from the ESP32 family. By type, the board carries 6 switches, 6 diodes, 6 capacitors, 2 resistors and 1 IC.
From the project
happy excited sad calm excited love
I’ve learnt Kathak for a while, and the best part is how a dancer can show a whole emotion with just her face, her hands and her feet. In Indian classical dance those emotions are called the rasas. So I thought: what if I could build a board you play with feelings?
It’s a circuit board shaped like a lotus. Each petal has a button, and each button is one emotion: love (Shringara), courage (Veera), sorrow (Karuna), joy (Hasya) and peace (Shanta). Press one, and an LED behind it lights up in that emotion’s color.
Main components on the Emotion engine
Emotion engine bill of materials (BOM)
21 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3 | XIAO ESP32-S3 | U1 |
| 5 | SW_Push | SW_PUSH-12mm | SW1, SW2, SW3, SW4, SW5 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW7 |
| 6 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6 |
| 6 | 100NF 100nf | C_1206_3216Metric | C1, C2, C3, C4, C5, C6 |
| 2 | 330OHM 330ohm | R_1206_3216Metric | R1, R2 |
Emotion engine design files
The KiCad project lives in the bhavanasrinamthabad1809-hub/emotion-engine repository on GitHub; these links point at the commit this page was built from.
Emotion engine: common questions
What microcontroller does the Emotion engine use?
The Emotion engine is built around the XIAO-ESP32-S3, from the ESP32 family.
How big is the Emotion engine PCB?
The Emotion engine measures 96.1 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Emotion engine?
21 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Emotion engine design files?
From the bhavanasrinamthabad1809-hub/emotion-engine repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Emotion engine design in my own project?
The repository has no license, so all rights stay with bhavanasrinamthabad1809-hub. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Emotion engine without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k