Stargazing
bhavanasrinamthabad1809-hub·stargazing·procastination/procastination.kicad_pcb
About the Stargazing PCB
Stargazing is an open source ESP32 PCB design by bhavanasrinamthabad1809-hub, published on GitHub. It is a 2-layer board measuring 100.5 × 78.5 mm, with 10 components from 8 distinct parts.
Its main chip is the ESP32-C3_SUPERMINI_SMD, from the ESP32 family. By type, the board carries 3 switches, 2 connectors, 2 resistors, 1 IC, 1 buzzer and 1 diode.
It belongs with the iot & wireless designs in this gallery.
From the project
game broh
A panda-shaped task clock that nags me when it's time to start, yells when time's up, and gives me a star if I actually did the thing.
I don't mean "oh, I put things off a little." I mean I sit down to read a book for 30 minutes, and somehow it is two hours later and I have watched a video about how bridges are built. Phone alarms don't work on me, because I swipe them away without even waking up properly. To-do apps don't work either, because opening an app is already a task I'm avoiding.
Main components on the Stargazing
Stargazing bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3_SUPERMINI_SMD | MODULE_ESP32-C3_SUPERMINI | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x06_Pin | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | SW_Push | SW_PUSH-12mm | SW1, SW2, SW3 |
| 1 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D11N4148 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
Stargazing design files
The KiCad project lives in the bhavanasrinamthabad1809-hub/stargazing repository on GitHub; these links point at the commit this page was built from.
Stargazing: common questions
What microcontroller does the Stargazing use?
The Stargazing is built around the ESP32-C3_SUPERMINI_SMD, from the ESP32 family.
How big is the Stargazing PCB?
The Stargazing measures 100.5 × 78.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stargazing?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stargazing design files?
From the bhavanasrinamthabad1809-hub/stargazing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stargazing design in my own project?
The repository has no license, so all rights stay with bhavanasrinamthabad1809-hub. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stargazing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k