9 open source boards using the ESP32-C3_SUPERMINI_SMD
Real designs built with the ESP32-C3_SUPERMINI_SMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Bigtolt
LJBoxx
111.1 × 130.1 mm396 parts6LCERN-OHL-S-2.05ESP32
Paxtogeddon-OLED
en4rab
42 × 60.2 mm25 parts2LMIT5ESP32
ESPHome-Presence-Detector With
Theered
40.1 × 65 mm6 parts2LCC-BY-NC-4.02ESP32
Stargazing
bhavanasrinamthabad1809-hub
100.5 × 78.5 mm10 parts2LNo license1ESP32
Diy led spot routed
FaisalHussain95
55.5 × 55.5 mm30 parts2LNo license0ESP32
AquaMind
savergiggio
109.7 × 53.5 mm14 parts2LMIT0ESP32
Formlabs wash sensor
uwmakerspace
33 × 24 mm2 parts2LMIT0ESP32
Keyboard NumPad v2.1
PsychoDuckTech
80.3 × 123.2 mm55 parts2LNo license0ESP32
Diy led spot step5
FaisalHussain95
48 × 37 mm13 parts2LNo license0
How designs wire the ESP32-C3_SUPERMINI_SMD
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ESP32-C3_SUPERMINI_SMD connects to, and the resistors, capacitors and other passives placed on it.
- The 5V pin is tied to 5V on 6 of 8 designs (not connected on 2).
- The GPIO2 pin is left unconnected on 5 of 8 designs (a signal on 3).
- The GPIO20 pin is left unconnected on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GPIO2pin 2 | Connected to: Not connected 63% · a signal 38% | — |
| 5Vpin 5V | Connected to: 5V 75% · not connected 25% | — |
| GPIO20pin 20 | Connected to: Not connected 63% · a signal 38% | — |
| GNDpin G | Connected to: GND 88% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Paxtogeddon-OLED-PCB by en4rab, Bigtolt by LJBoxx, ESPHome-Presence-Detector With-PCB by Theered and Stargazing by bhavanasrinamthabad1809-hub.
The ESP32-C3_SUPERMINI_SMD in open source designs
The gallery holds 9 open source boards using the ESP32-C3_SUPERMINI_SMD from 8 GitHub repositories; a typical one measures about 55.5 × 60.2 mm and carries around 14 components.
89% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Bigtolt by LJBoxx.
Microcontrollers on boards using the ESP32-C3_SUPERMINI_SMD
What boards using the ESP32-C3_SUPERMINI_SMD are built for
ESP32-C3_SUPERMINI_SMD: common questions
Where can I find a ESP32-C3_SUPERMINI_SMD reference design?
Each of the 9 boards on this page is a real design using the ESP32-C3_SUPERMINI_SMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-C3_SUPERMINI_SMD 5V pin connected?
The 5V pin is tied to 5V on 6 of 8 designs (not connected on 2). Counted from the KiCad layouts of 8 open source designs using the ESP32-C3_SUPERMINI_SMD.
How is the ESP32-C3_SUPERMINI_SMD GPIO2 pin connected?
The GPIO2 pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the ESP32-C3_SUPERMINI_SMD.
How is the ESP32-C3_SUPERMINI_SMD GPIO20 pin connected?
The GPIO20 pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the ESP32-C3_SUPERMINI_SMD.
Which microcontrollers do boards using the ESP32-C3_SUPERMINI_SMD use?
Most are built on ESP32 (9).
How big is a typical board using the ESP32-C3_SUPERMINI_SMD?
The median is 55.5 × 60.2 mm, and 89% are two-layer designs.
What is the most popular open source board using the ESP32-C3_SUPERMINI_SMD?
By GitHub stars, Bigtolt by LJBoxx, with 5 stars.
Can I simulate one of these boards using the ESP32-C3_SUPERMINI_SMD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.