HardLabs

Angelanddevil addon

bi-zone·offzone-hw·2025/angelanddevil_addon/angelanddevil_addon.kicad_pcb

Angelanddevil addon PCB layout, top view — open source board by bi-zone
Simulate this board

About the Angelanddevil addon PCB

Angelanddevil addon is an open source PCB design by bi-zone, published on GitHub. It is a 2-layer board measuring 46.4 × 37.7 mm, with 13 components from 7 distinct parts.

By type, the board carries 4 diodes, 4 resistors, 2 transistors, 2 capacitors and 1 connector.

From the project

Количество проводящих слоев: 2 Базовый материал (Core): FR4 Суммарная толщина платы, мм: 1.5 Толщина фольги, мкм: 18 или 35 Финишное покрытие площадок: HASL Паяльная маска: белая * Маркировка обозначений: чёрная

Количество проводящих слоев: 2 Базовый материал (Core): FR4 Суммарная толщина платы, мм: 1.5 Толщина фольги, мкм: 18 или 35 Финишное покрытие площадок: HASL Паяльная маска: белая * Маркировка обозначений: чёрная

2 светодиода 1206 Белые 2 светодиода 1206 Красные 2 резистора 1206 220 Ом 2 резистора 1206 300кОм 2 конденсатора 1206 22 мкФ 2 транзистора BC807-25 * Коннектор PLD-6

Angelanddevil addon, from the project README
From the project README

Angelanddevil addon bill of materials (BOM)

13 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
Q_PNP_BEC
Q1, Q2
1
Conn_02x03
J1
2
LED_RED
D1, D2
2
LED_WHITE
D3, D4
2
22 uF
C1, C2
2
300k
R1, R4
2
220
R2, R3

Angelanddevil addon design files

The KiCad project lives in the bi-zone/offzone-hw repository on GitHub; these links point at the commit this page was built from.

Angelanddevil addon: common questions

How big is the Angelanddevil addon PCB?

The Angelanddevil addon measures 46.4 × 37.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Angelanddevil addon?

13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Angelanddevil addon design files?

From the bi-zone/offzone-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Angelanddevil addon design in my own project?

The repository has no license, so all rights stay with bi-zone. Use it as a reference, and ask the author before reusing the design.

More boards in offzone-hw