PayGo Lock Board
Bigfavour51·PayGo_Lock_Board
About the PayGo Lock Board
PayGo Lock Board is an open source PCB design by Bigfavour51, published on GitHub. It is a board, with 57 components from 30 distinct parts.
Other key parts include the A7670E-LASE, MFF2 eSIM, L76KB-A58 and AP2112K-3.3TRG1(MS). By type, the board carries 19 resistors, 15 capacitors, 6 diodes, 5 test points, 4 ICs and 4 transistors.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
Hierarchical schematic skeleton for the lock board described in the hardware spec v0.1. Opens in KiCad 8 or 9. Open paygolockboard.kicadpro`.
Hierarchical schematic skeleton for the lock board described in the hardware spec v0.1. Opens in KiCad 8 or 9. Open paygolockboard.kicadpro`.
- System Overview (page 1): block diagram made of clickable sheet symbols. Double-click a block to open that sheet; press Backspace / Alt+← to go back up. - 9 sub-sheets, one per circuit block, each with: - a full title block driven by project variables - interface labels (hierarchical labels) on the left (in) and right (out), already matched to the pins on page 1 - dashed functional zones showing where each sub-circuit goes, with the part class and…
Main components on the PayGo Lock Board
PayGo Lock Board bill of materials (BOM)
57 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A7670E-LASE A7670E | SIMCom_A7670X_LCC-LGA-124_24x24mm | U801 |
| 1 | MFF2 eSIM | MFF2_ETSI_TS102671_DFN-8_6x5mm_P1.27mm | U802 |
| 1 | L76KB-A58 L76K | Quectel_L76 | U803 |
| 1 | AP2112K-3.3TRG1(MS) AP2112K-3.3 | SOT-23-5 | U804 |
| 4 | MMBT3904 | SOT-23 | Q801, Q802, Q803, Q804 |
| 1 | NANO SIM XG6P H1.35 nano-SIM | SIM_Nano_XG6P_H1.35_HingedLid | J801 |
| 1 | U.FL-R-SMT-1(80) LTE u.FL | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J802 |
| 1 | U.FL-R-SMT-1(80) GNSS u.FL | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J803 |
| 1 | D+ | TestPoint_Pad_D1.0mm | TP801 |
| 1 | D- | TestPoint_Pad_D1.0mm | TP802 |
| 1 | VBUS | TestPoint_Pad_D1.0mm | TP803 |
| 1 | BOOT | TestPoint_Pad_D1.0mm | TP804 |
| 1 | RST | TestPoint_Pad_D1.0mm | TP805 |
| 1 | TPD1E10B06DPYR TVS 5V | D_0402_1005Metric | D801 |
| 1 | KT-0603YG YEL-GRN | LED_0603_1608Metric | D802 |
| 4 | TPD1E10B06DPYR ESD 5V | D_0402_1005Metric | D803, D804, D805, D806 |
| 1 | LQG15HN68NJ02D 68nH | L_0402_1005Metric | L801 |
| 1 | T520D337M006ATE025 330uF 6.3V | CP_EIA-7343-31_Kemet-D | C801 |
| 3 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C802, C808, C809 |
| 5 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C803, C806, C807, C812, C814 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0402CG330J500NT 33pF | C_0402_1005Metric | C804 |
| 1 | CL05C100JB5NNNC 10pF | C_0402_1005Metric | C805 |
| 2 | DNP | C_0402_1005Metric | C810, C811 |
| 2 | 0402CG101J500NT 100pF | C_0402_1005Metric | C813, C815 |
| 7 | 0603WAF4701T5E 4.7k | R_0603_1608Metric | R801, R803, R806, R807, R808, R809, R819 |
| 2 | 0603WAF4702T5E 47k | R_0603_1608Metric | R802, R804 |
| 2 | 0603WAF1001T5E 1k | R_0603_1608Metric | R805, R813 |
| 6 | 0603WAF220JT5E 22R | R_0603_1608Metric | R810, R811, R812, R816, R817, R818 |
| 1 | 0603WAF100JT5E 10R | R_0603_1608Metric | R814 |
| 1 | 0402WGF0000TCE 0R | R_0402_1005Metric | R815 |
PayGo Lock Board design files
The KiCad project lives in the Bigfavour51/PayGo_Lock_Board repository on GitHub; these links point at the commit this page was built from.
- Schematic08_cellular_gnss.kicad_sch
PayGo Lock Board: common questions
How many components are on the PayGo Lock Board?
57 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the PayGo Lock Board design files?
From the Bigfavour51/PayGo_Lock_Board repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the PayGo Lock Board design in my own project?
The repository has no license, so all rights stay with Bigfavour51. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956