SchrackCounterPrototype

bismarx-v1·SchrackProjects·SchrackCounter/PCB/SchrackCounterPrototype/SchrackCounterPrototype.kicad_pcb

SchrackCounterPrototype PCB layout, top view — open source ESP32 board by bismarx-v1

About the SchrackCounterPrototype PCB

SchrackCounterPrototype is an open source ESP32 PCB design by bismarx-v1, published on GitHub. It is a 4-layer board measuring 119.5 × 93.5 mm, with 26 components from 14 distinct parts.

Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 12 resistors, 3 switches, 3 diodes, 3 capacitors, 2 connectors and 1 IC.

From the project

SPS na Proseku repo for SchrackTechink projects.

Main components on the SchrackCounterPrototype

SchrackCounterPrototype bill of materials (BOM)

26 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DevKitC
U1
1
Conn_01x05_Pin
J1
1
Conn_01x06_Pin
J2
1
Battery
BT1
1
Buzzer
BZ1
1
SW_Push
SW1
2
SW_Push
SW2, SW3
3
LED
D1, D2, D3
2
100nF
C1, C3
1
10uF
C2
3
220R
R1, R2, R3
1
1k
R4
3
10k
R5, R6, R7
5
0R
R8, R9, R10, R11, R12

SchrackCounterPrototype design files

The KiCad project lives in the bismarx-v1/SchrackProjects repository on GitHub; these links point at the commit this page was built from.

SchrackCounterPrototype: common questions

What microcontroller does the SchrackCounterPrototype use?

The SchrackCounterPrototype is built around the ESP32-S3-DevKitC, from the ESP32 family.

How big is the SchrackCounterPrototype PCB?

The SchrackCounterPrototype measures 119.5 × 93.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SchrackCounterPrototype?

26 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SchrackCounterPrototype design files?

From the bismarx-v1/SchrackProjects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SchrackCounterPrototype design in my own project?

The repository has no license, so all rights stay with bismarx-v1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SchrackCounterPrototype without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SchrackProjects

Similar boards