Turbo touch
bitaxeorg·turbo-touch
About the Turbo touch PCB
Turbo touch is an open source ESP32 PCB design by bitaxeorg, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 110 × 68 mm, with 44 components from 24 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPSM861253RDXR and TPS61160. By type, the board carries 18 resistors, 10 capacitors, 5 diodes, 4 connectors, 3 ICs and 2 switches.
From the project
Turbo Touch is an open hardware project featuring an ESP32-S3 microcontroller driving a 4.3LCD-ST7262-GT911 capacitive touch display. This accessory is designed specifically for the Bitaxe ecosystem, utilizing the Bitaxe Accessory Port (BAP). Turbo Touch is the first accessory to
Turbo Touch is an open hardware project featuring an ESP32-S3 microcontroller driving a 4.3LCD-ST7262-GT911 capacitive touch display. This accessory is designed specifically for the Bitaxe ecosystem, utilizing the Bitaxe Accessory Port (BAP). Turbo Touch is the first accessory to leverage the BAP, enabling new interactive and display capabilities for Bitaxe-based projects.
Main components on the Turbo touch
Turbo touch bill of materials (BOM)
44 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPSM861253RDXR Texas Instruments | TPSM863257RDX | U1 |
| 1 | TPS61160 Texas Instruments | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U2 |
| 1 | ESP32-S3-WROOM-1 Espressif Systems | ESP32-S3-WROOM-1 | U3 |
| 1 | SI2307 Vishay Intertech | SOT-23-3 | Q1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 SOFNG | USB_C_Receptacle_GCT_USB4105-xx-A | J1 |
| 1 | LCD-4.3-40-PIN LCD-4.3-40-pin Amphenol ICC | FPC-1x40-1MP_P0.5mm_Horizontal | J2 |
| 1 | CONN_01X06 Conn_01x06 JUSHUO | Jushuo_AFC07-S06FCA-00_1x6-1MP_P0.50_Horizontal | J3 |
| 1 | BAP JUSHUO | FPC-SMD_P0.50-8P_FGS-XJ-H2.0 | J4 |
| 2 | GT-TC029B-H025-L1N XUNPU | SW_CS1213AGF260_CRS | SW1, SW2 |
| 2 | MBR0540T1 PANJIT International | D_SOD-123 | D1, D5 |
| 3 | LESD8LH5.0CT5G Nexperia | D_SOD-323 | D2, D3, D4 |
| 1 | 22UH 22uH TDK | L_TDK_VLCF5020T | L1 |
| 4 | 1UF 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C1, C2, C9, C10 |
| 3 | 10UF 10uF Murata Electronics | C_0603_1608Metric | C3, C4, C5 |
| 1 | 220NF 220nF Samsung Electro-Mechanics | C_0402_1005Metric | C6 |
| 2 | 100NF 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C7, C8 |
| 1 | 20K YAGEO | R_0402_1005Metric | R1 |
| 4 | 10K YAGEO | R_0402_1005Metric | R2, R7, R14, R15 |
| 2 | 5.1K YAGEO | R_0402_1005Metric | R3, R4 |
| 1 | 5R VO | R_0603_1608Metric | R5 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1K YAGEO | R_0402_1005Metric | R6, R11 |
| 5 | NC | R_0402_1005Metric | R8, R9, R10, R12, R13 |
| 1 | 100K YAGEO | R_0402_1005Metric | R16 |
| 2 | 0R YAGEO | R_0402_1005Metric | R17, R18 |
Turbo touch design files
The KiCad project lives in the bitaxeorg/turbo-touch repository on GitHub; these links point at the commit this page was built from.
Turbo touch: common questions
What microcontroller does the Turbo touch use?
The Turbo touch is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Turbo touch PCB?
The Turbo touch measures 110 × 68 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Turbo touch?
44 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Turbo touch design files?
From the bitaxeorg/turbo-touch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Turbo touch design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which bitaxeorg chose for the repository.
Can I test firmware for the Turbo touch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k