RV3032 Breakout
About the RV3032 Breakout
RV3032 Breakout is an open source PCB design by bitbank2, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 20 × 15 mm, with 8 components from 6 distinct parts.
By type, the board carries 4 resistors, 2 capacitors and 1 connector.
It belongs with the dev boards & breakouts and displays & leds designs in this gallery.
From the project
A place to share all of my PCB projects
A collection of KiCad PCB projects. I've included the Gerber files (zipped) so that you can directly order these PCBs from your favorite PCB supplier without having to use KiCad.
A DS3231 realtime clock breakout board modelled after the RPI RTC boards. The 5 pin header matches the pinout of the Raspberry Pi and adds the interrupt pin (pulled up to 3.3v). It includes a QWIIC connector (JST 4-pin 1mm) and I also added a small switch to completely disconnect the backup battery if you plan on leaving it unused for an extended period of time. There's a small CR44 backup battery soldered to the…
RV3032 Breakout bill of materials (BOM)
8 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05_Female | PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | 100n | C_0603_1608Metric | 100n |
| 1 | 100n | C_0603_1608Metric | C1 |
| 1 | XH414HG-IV01E | CAP_XH414HG-IV01E | C2 |
| 2 | 4k7 | R_0603_1608Metric | R1, R2 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
RV3032 Breakout design files
The KiCad project lives in the bitbank2/KiCad_Projects repository on GitHub; these links point at the commit this page was built from.
RV3032 Breakout: common questions
How big is the RV3032 Breakout?
The RV3032 Breakout measures 20 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RV3032 Breakout?
8 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the RV3032 Breakout design files?
From the bitbank2/KiCad_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RV3032 Breakout design in my own project?
Yes, under the terms of its Apache-2.0 license, which bitbank2 chose for the repository.
More boards in KiCad_Projects
AVR/ArduinoSHARP FEATHER NANO
43.9 × 53.1 mm12 parts2LApache-2.016
AVR/ArduinoLCD HAT
45.7 × 53.4 mm11 parts2LApache-2.016
XIAO Sharp LCD
40.1 × 31.7 mm11 parts2LApache-2.016
Ds3231 plus
18.2 × 22.2 mm8 parts2LApache-2.016
XIAO LCD
40.1 × 31.7 mm7 parts2LApache-2.016
CH32V003 Breakout
19.4 × 27.2 mm3 parts2LApache-2.016
LCD 64x32 Breakout
24 × 15 mm3 parts2LApache-2.016
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k