MiniNDP OG
bkw777·NODE_DATAPAC·attic/PCB/MiniNDP_OG.kicad_pcb
About the MiniNDP OG PCB
MiniNDP OG is an open source PCB design by bkw777, published on GitHub under the Custom license license. It is a 2-layer board measuring 60 × 34 mm, with 18 components from 13 distinct parts.
Other key parts include the 74HC161PW,118, 74HC138PW,118, 74HC574PW,118, AS6C4008-55STIN and 74LVC1G32GW,125. By type, the board carries 8 ICs, 5 capacitors, 2 resistors, 1 connector and 1 battery holder.
From the project
Reproduction & documentation of Node Systems DATAPAC
This repo documents the NODE Systems DATAPAC, rampac, and a new clone, the MiniNDP.
The NODE Systems DATAPAC/rampac was a popular ram disk peripheral for TRS-80 / TANDY Models 100, 102, & 200 computers.
The schematic and PCB below documents the DATAPAC.
rampac is a smaller later version of the same device that uses fewer larger sram chips and replaces most of the discrete logic IC's with a single PLD, but functions exactly the same.

Main components on the MiniNDP OG
MiniNDP OG bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74HC161PW,118 HC161 | TSSOP-16 | U1, U2, U3 |
| 1 | 74HC138PW,118 HC138 | TSSOP-16 | U4 |
| 1 | 74HC574PW,118 HC574 | TSSOP-20 | U5 |
| 1 | AS6C4008-55STIN AS6C4008 | TSOP32-dual | U6 |
| 1 | 74LVC1G32GW,125 1G32 | SOT-353_SC-70-5 | U7 |
| 1 | 74LVC1G79GW,125 1G79 | SOT-353_SC-70-5 | U8 |
| 1 | 302-S401 Conn_02x20_Odd_Even | IDC-Header_2x20_P2.54mm_Vertical | J1 |
| 1 | Keystone_3028 | Keystone_3028_3034_bkw | BT1 |
| 1 | BAV70-7-F BAV70 | SOT-23 | DA1 |
| 1 | TLJW157M010R0200 150u | CP_6032 | C1 |
| 4 | CL21B105KAFNNNE 1u | C_0805 | C2, C3, C4, C5 |
| 1 | RK73B2ATTD102J 1k | R_0805 | R1 |
| 1 | RMCF0805FT47K0 47k | R_0805 | R2 |
MiniNDP OG design files
The KiCad project lives in the bkw777/NODE_DATAPAC repository on GitHub; these links point at the commit this page was built from.
MiniNDP OG: common questions
How big is the MiniNDP OG PCB?
The MiniNDP OG measures 60 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MiniNDP OG?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MiniNDP OG design files?
From the bkw777/NODE_DATAPAC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MiniNDP OG design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in NODE_DATAPAC
NODE DATAPAC 256K bkw remake
bkw777
255.3 × 43.2 mm28 parts2LCustom license7NODE DATAPAC 256K historical reproduction
bkw777
254 × 43.2 mm22 parts2LCustom license7MiniNDP
bkw777
60 × 34 mm16 parts2LCustom license7MiniNDP T512
bkw777
60 × 34 mm15 parts2LCustom license7MiniNDP EZ512
bkw777
60 × 34 mm15 parts2LCustom license7MiniNDP EZ256
bkw777
60 × 34 mm14 parts2LCustom license7MiniNDP SL1M
bkw777
60 × 34 mm13 parts2LCustom license7MiniNDP M10
bkw777
72 × 26 mm13 parts2LCustom license7MiniNDP u1M
bkw777
51.3 × 18.3 mm12 parts2LCustom license7MiniNDP 512 Breadboard
bkw777
157.5 × 55.9 mm9 parts2LCustom license7