MiniNDP u1M
bkw777·NODE_DATAPAC·PCB/MiniNDP_u1M.kicad_pcb
About the MiniNDP u1M PCB
MiniNDP u1M is an open source PCB design by bkw777, published on GitHub under the Custom license license. It is a 2-layer board measuring 51.3 × 18.3 mm, with 12 components from 10 distinct parts.
Other key parts include the AS6C8008-55ZIN, 74HC238PW,118, 74HC4040PW,118 and SN74ABT841APW. By type, the board carries 4 ICs, 4 capacitors, 1 connector, 1 battery holder and 1 resistor.
From the project
Reproduction & documentation of Node Systems DATAPAC
This repo documents the NODE Systems DATAPAC, rampac, and a new clone, the MiniNDP.
The NODE Systems DATAPAC/rampac was a popular ram disk peripheral for TRS-80 / TANDY Models 100, 102, & 200 computers.
The schematic and PCB below documents the DATAPAC.
rampac is a smaller later version of the same device that uses fewer larger sram chips and replaces most of the discrete logic IC's with a single PLD, but functions exactly the same.

Main components on the MiniNDP u1M
MiniNDP u1M bill of materials (BOM)
12 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS6C8008-55ZIN AS6C8008_TSOPII | TSOP-II-44 | U1 |
| 1 | 74HC238PW,118 HC238 | TSSOP-16 | U2 |
| 1 | 74HC4040PW,118 HC4040 | TSSOP-16 | U3 |
| 1 | SN74ABT841APW ABT841 | TSSOP-24 | U4 |
| 1 | 920-0172-01 Model_100_System_BUS | DIP-40_PCB | J1 |
| 1 | Keystone 3031 Keystone_3031 | Keystone_3031 | BT1 |
| 1 | BAV70-7-F BAV70 | SOT-23 | DA1 |
| 3 | CL21B105KAFNNNE 1u | C_0805 | C1, C2, C3 |
| 1 | C3216X5R1E476M160DC 47u | C_1206 | C4 |
| 1 | RMCF0805FT47K0 47k | R_0805 | R1 |
MiniNDP u1M design files
The KiCad project lives in the bkw777/NODE_DATAPAC repository on GitHub; these links point at the commit this page was built from.
MiniNDP u1M: common questions
How big is the MiniNDP u1M PCB?
The MiniNDP u1M measures 51.3 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MiniNDP u1M?
12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MiniNDP u1M design files?
From the bkw777/NODE_DATAPAC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MiniNDP u1M design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in NODE_DATAPAC
NODE DATAPAC 256K bkw remake
bkw777
255.3 × 43.2 mm28 parts2LCustom license7NODE DATAPAC 256K historical reproduction
bkw777
254 × 43.2 mm22 parts2LCustom license7MiniNDP OG
bkw777
60 × 34 mm18 parts2LCustom license7MiniNDP
bkw777
60 × 34 mm16 parts2LCustom license7MiniNDP T512
bkw777
60 × 34 mm15 parts2LCustom license7MiniNDP EZ512
bkw777
60 × 34 mm15 parts2LCustom license7MiniNDP EZ256
bkw777
60 × 34 mm14 parts2LCustom license7MiniNDP SL1M
bkw777
60 × 34 mm13 parts2LCustom license7MiniNDP M10
bkw777
72 × 26 mm13 parts2LCustom license7MiniNDP 512 Breadboard
bkw777
157.5 × 55.9 mm9 parts2LCustom license7