NODE DATAPAC 256K historical reproduction

bkw777·NODE_DATAPAC·PCB/NODE_DATAPAC_256K_historical_reproduction.kicad_pcb

NODE DATAPAC 256K historical reproduction PCB layout, top view — open source board by bkw777

About the NODE DATAPAC 256K historical reproduction PCB

NODE DATAPAC 256K historical reproduction is an open source PCB design by bkw777, published on GitHub under the Custom license license. It is a 2-layer board measuring 254 × 43.2 mm, with 22 components from 19 distinct parts.

Other key parts include the HC161, HC138, HC574, AS6C4008-55STIN and 1G32. By type, the board carries 10 ICs, 6 test points, 3 resistors, 1 connector, 1 battery holder and 1 diode.

From the project

Reproduction & documentation of Node Systems DATAPAC

This repo documents the NODE Systems DATAPAC, rampac, and a new clone, the MiniNDP.

The NODE Systems DATAPAC/rampac was a popular ram disk peripheral for TRS-80 / TANDY Models 100, 102, & 200 computers.

The schematic and PCB below documents the DATAPAC.

rampac is a smaller later version of the same device that uses fewer larger sram chips and replaces most of the discrete logic IC's with a single PLD, but functions exactly the same.

NODE DATAPAC 256K historical reproduction, from the project README
From the project README

Main components on the NODE DATAPAC 256K historical reproduction

HC161HC138HC574AS6C4008-55STIN1G321G79P51256SL-10

NODE DATAPAC 256K historical reproduction bill of materials (BOM)

22 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
HC161
SN74HC161N
U1, U2, U3
1
HC138
SN74HC138N
U4
1
HC574
SN74HC138N
U5
1
AS6C4008-55STIN
74HC374N
U6
1
1G32
P51256SL-10
U7
1
1G79
P51256SL-10
U8
2
P51256SL-10
U9, U10
1
302-S401
Conn_02x20_Odd_Even
J1
1
KEYSTONE_3028
PMB3.6B
BT1
1
U11_~{CS}
TP1
1
U12_~{CS}
TP2
1
U13_~{CS}
TP3
1
U14_~{CS}
TP4
1
VMEM
TP5
1
GND
TP6
1
1N4148
D1
1
RK73B2ATTD102J
200
R1
1
RMCF0805FT47K0
5.1k
R2
1
240k
R3

NODE DATAPAC 256K historical reproduction design files

The KiCad project lives in the bkw777/NODE_DATAPAC repository on GitHub; these links point at the commit this page was built from.

NODE DATAPAC 256K historical reproduction: common questions

How big is the NODE DATAPAC 256K historical reproduction PCB?

The NODE DATAPAC 256K historical reproduction measures 254 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NODE DATAPAC 256K historical reproduction?

22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NODE DATAPAC 256K historical reproduction design files?

From the bkw777/NODE_DATAPAC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NODE DATAPAC 256K historical reproduction design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in NODE_DATAPAC