Mathup
bloosheddev·mathup·MUC_PCB/MUC_PCB.kicad_pcb
About the Mathup PCB
Mathup is an open source ESP32 PCB design by bloosheddev, published on GitHub. It is a 2-layer board measuring 79 × 43.5 mm, with 7 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 1 IC, 1 connector and 1 buzzer.
It belongs with the keyboards designs in this gallery.
From the project
A clock.

Main components on the Mathup
Mathup bill of materials (BOM)
7 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-DIP | U1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
Mathup design files
The KiCad project lives in the bloosheddev/mathup repository on GitHub; these links point at the commit this page was built from.
- LayoutMUC_PCB/MUC_PCB.kicad_pcb
- SchematicMUC_PCB/MUC_PCB.kicad_sch
- BOMProduction/BOM.csv
Mathup: common questions
What microcontroller does the Mathup use?
The Mathup is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Mathup PCB?
The Mathup measures 79 × 43.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mathup?
7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mathup design files?
From the bloosheddev/mathup repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mathup design in my own project?
The repository has no license, so all rights stay with bloosheddev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mathup without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k