05-can encoder

BlueJayRacing·22xt_kicad·05-can_encoder/05-can_encoder.kicad_pcb

05-can encoder PCB layout, top view — open source STM32 board by BlueJayRacing

About the 05-can encoder PCB

05-can encoder is an open source STM32 PCB design by BlueJayRacing, published on GitHub. It is a 2-layer board measuring 25.4 × 25.4 mm, with 20 components from 16 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the AS5047P-ATSM, SN65HVD230DR and MYRBP500080W21RD. By type, the board carries 13 capacitors, 4 ICs, 2 resistors and 1 connector.

From the project

As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

Schematic settings & layout settings are described in the guide, as well as component derating.

Create your KiCad project on YOUR branch, within your current project folder.

Example Path: > 01-mainboard/mainboard_v1

Main components on the 05-can encoder

05-can encoder bill of materials (BOM)

20 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
IC1
1
AS5047P-ATSM
IC2
1
SN65HVD230DR
U1
1
MYRBP500080W21RD
LM3940IMPX-3.3_NOPB
U2
1
Conn_02x05_Odd_Even
J1
2
100PF
100nF
C1, C3
1
2.2UF
100nF
C2
1
10UF
4.7uF
C4
1
10UF
33uF
C5
1
0.1UF
0.47uF
C6
3
100nF
C7, C11, C12
1
4.7uF
C8
1
10nF
C9
2
1uF
C10, C13
1
10k
R1
1
60
R2

05-can encoder design files

The KiCad project lives in the BlueJayRacing/22xt_kicad repository on GitHub; these links point at the commit this page was built from.

05-can encoder: common questions

What microcontroller does the 05-can encoder use?

The 05-can encoder is built around the STM32F072CBT6, from the STM32 family.

How big is the 05-can encoder PCB?

The 05-can encoder measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 05-can encoder?

20 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 05-can encoder design files?

From the BlueJayRacing/22xt_kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 05-can encoder design in my own project?

The repository has no license, so all rights stay with BlueJayRacing. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 05-can encoder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in 22xt_kicad

Similar boards