18 open source boards using the AS5047P-ATSM

Real designs built with the AS5047P-ATSM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the AS5047P-ATSM

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the AS5047P-ATSM connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD3V3 pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 1 µF).
  • The TEST pin is tied to GND on 13 of 14 designs.
  • The W/PWM pin is left unconnected on 12 of 14 designs (a signal on 2).
  • The V pin is left unconnected on 12 of 14 designs (a signal on 2).
TESTpin 5Connected to: GND 93%
Bpin 6Connected to: Not connected 64% · a signal 36%
Apin 7Connected to: Not connected 64% · a signal 36%
W/PWMpin 8Connected to: Not connected 86%
Vpin 9Connected to: Not connected 86%
Upin 10Connected to: Not connected 86%
VDDpin 11Connected to: 3.3V 64% · a signal 36%
  • Decoupling capacitor on 71% · 100 nF (18), 1 µF (2), 47 µF (2)
VDD3V3pin 12Connected to: 3.3V 64% · a signal 36%
  • Decoupling capacitor on 79% · 100 nF (19), 1 µF (3), 47 µF (2)
GNDpin 13Connected to: GND 93%
I/PWMpin 14Connected to: Not connected 79% · a signal 21%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${DOC TYPE} Document by EPFLXplore, EtherCATControllerHP by kscalelabs, AS5047P-Board by Westly-Bouchard and SmartKnobController by Larson-Nick.

The AS5047P-ATSM in open source designs

The gallery holds 18 open source boards using the AS5047P-ATSM from 15 GitHub repositories; a typical one measures about 60 × 62 mm and carries around 90 components.

56% use four copper layers or more, and 39% carry an open source license.

The most starred is ${DOC TYPE} Document by EPFLXplore.

Microcontrollers on boards using the AS5047P-ATSM

AS5047P-ATSM: common questions

Where can I find a AS5047P-ATSM reference design?

Each of the 18 boards on this page is a real design using the AS5047P-ATSM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AS5047P-ATSM VDD3V3 pin?

The VDD3V3 pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the AS5047P-ATSM.

How is the AS5047P-ATSM TEST pin connected?

The TEST pin is tied to GND on 13 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the AS5047P-ATSM.

How is the AS5047P-ATSM W/PWM pin connected?

The W/PWM pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the AS5047P-ATSM.

What parts are used alongside the AS5047P-ATSM?

The DRV8353FSRTAR, DGD0216WT-7, LMR36006FSCQRNXTQ1, LMR36506MSC5RPERQ1 and LP2992IM5-3.3/NOPB appear in the most repositories here.

Which microcontrollers do boards using the AS5047P-ATSM use?

Most are built on STM32 (11).

How big is a typical board using the AS5047P-ATSM?

The median is 60 × 62 mm, and 44% are two-layer designs.

What is the most popular open source board using the AS5047P-ATSM?

By GitHub stars, ${DOC TYPE} Document by EPFLXplore, with 347 stars.

Can I simulate one of these boards using the AS5047P-ATSM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part