ESP32S3
BlueJayRacing·22xt_kicad·01-main_board/00-symbols/ESP32S3.kicad_pcb
About the ESP32S3 PCB
ESP32S3 is an open source ESP32 PCB design by BlueJayRacing, published on GitHub. It is a 2-layer board measuring 17.8 × 21.1 mm, with 71 components from 42 distinct parts.
Its main chip is the LP0404N3T5G, from the ESP32 family. Other key parts include the ESP32-S3R8, SGM6029CYG/TR, SGM40567-4.2XG/TR and GD25Q64ENIGR. By type, the board carries 28 capacitors, 13 resistors, 8 test points, 4 ICs, 4 inductors and 3 connectors.
From the project
As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.
As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.
Schematic settings & layout settings are described in the guide, as well as component derating.
Create your KiCad project on YOUR branch, within your current project folder.
Example Path: > 01-mainboard/mainboard_v1
Main components on the ESP32S3
ESP32S3 bill of materials (BOM)
71 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3R8 | QFN56G-0.4-7X7MM | U1 |
| 1 | SGM6029CYG/TR | BGA6-0.35-0.745X10.95X0.4MM | U3 |
| 1 | SGM40567-4.2XG/TR | WLCSP-0.4-0.92X1.16X0.4MM | U4 |
| 1 | GD25Q64ENIGR | USON8-0.8-4X3MM | U5 |
| 1 | LP0404N3T5G | PMOS_1.0_0.6_0.35MM | Q1 |
| 1 | 40MHz/306011364 | X4-SMD-1.6X1.2X0.35MM | X1 |
| 2 | DNP | H7-HALF-HOLE-2.54 | J1, J2 |
| 1 | DF40C-30DP-0.4V(51) | BTB30-0.4-7.52X2.97X1.14 | J3 |
| 1 | U.FL-R-SMT-1 | U-FL3P-SMD-2.6X2.6X1.0MM | ANT1 |
| 1 | VBAT | TP-80X40MIL | BAT0 |
| 1 | GND | TP-80X40MIL | GND0 |
| 2 | SKTAAAE010/311021459 | SW4-SMD-2.8-2.6X1.6X0.53MM | K1, K2 |
| 8 | — | TP-D45MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 1 | UBF31-0171 | USB2.0-TYPE-C | USB0 |
| 1 | RED | LED-0402 | CHG0 |
| 1 | LMBR4010BST5G | DFN1006-2L | D2 |
| 1 | Yellow | LED-0402 | D3 |
| 1 | 2nH | L0201 | L1 |
| 1 | 3.3nH | L0201 | L2 |
| 1 | DNP | L0201 | L3 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470nH | L0603 | L4 |
| 1 | 100PF DNP | C0201 | C1 |
| 1 | 2.2UF DNP | C0201 | C2 |
| 1 | 100PF 2.2uF | C0201 | C3 |
| 2 | 10UF 4.7uF | C0201 | C4, C5 |
| 1 | 0.1UF 4.7uF | C0201 | C6 |
| 3 | 10pF | C0201 | C7, C8, C28 |
| 3 | 2.2uF | C0201 | C9, C13, C16 |
| 4 | 1uF | C0201 | C10, C21, C25, C26 |
| 8 | 100nF | C0201 | C11, C14, C15, C19, C22, C23, C29, C30 |
| 1 | 10nF | C0201 | C12 |
| 2 | DNP | C0201 | C17, C20 |
| 1 | 1pF | C0201 | C18 |
| 2 | 5.1K | R0201 | R1, R2 |
| 2 | 22R | R0201 | R3, R4 |
| 1 | 0R | R0201 | R5 |
| 1 | 499R | R0201 | R6 |
| 3 | 10K | R0201 | R7, R8, R11 |
| 1 | 100K | C0201 | R9 |
| 1 | 220K | R0201 | R10 |
| 1 | 249K | R0201 | R13 |
| 1 | 1.5K | R0201 | R15 |
ESP32S3 design files
The KiCad project lives in the BlueJayRacing/22xt_kicad repository on GitHub; these links point at the commit this page was built from.
ESP32S3: common questions
What microcontroller does the ESP32S3 use?
The ESP32S3 is built around the LP0404N3T5G, from the ESP32 family.
How big is the ESP32S3 PCB?
The ESP32S3 measures 17.8 × 21.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32S3?
71 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32S3 design files?
From the BlueJayRacing/22xt_kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32S3 design in my own project?
The repository has no license, so all rights stay with BlueJayRacing. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32S3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in 22xt_kicad
ESP32
Main board v3
BlueJayRacing
85 × 73 mm113 parts4LNo license0ESP32
WSG 2.0
BlueJayRacing
56.8 × 22.7 mm86 parts4LNo license0STM32
05-can encoder
BlueJayRacing
25.4 × 25.4 mm20 parts2LNo license0Main board peripheral v3 1
BlueJayRacing
41 × 25 mm16 parts4LNo license0Thermistor circuit
BlueJayRacing
31 × 16 mm9 parts2LNo license0TC kent
BlueJayRacing
32.5 × 17 mm9 parts2LNo license0TC shuwen
BlueJayRacing
28 × 20 mm8 parts2LNo license0ADS1120IPWR
BlueJayRacing
23.5 × 24.5 mm7 parts2LNo license0DB44 breakout
BlueJayRacing
89 × 69.8 mm6 parts2LNo license0W25Q02JVTBIM breakout
BlueJayRacing
30.3 × 15.3 mm5 parts2LNo license0AD5689RARUZ-RL7 breakboard
BlueJayRacing
23 × 23.8 mm5 parts2LNo license0
Earlier revisions in the repo: esp32s3
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k