Main board v3

BlueJayRacing·22xt_kicad·01-main_board/main_board_v3/main_board_v3.kicad_pcb

Main board v3 layout, top view — open source ESP32 board by BlueJayRacing

About the Main board v3

Main board v3 is an open source ESP32 PCB design by BlueJayRacing, published on GitHub. It is a 4-layer board measuring 85 × 73 mm, with 113 components from 45 distinct parts.

Its main chip is the XIAO-ESP32-S3, from the ESP32 family. Other key parts include the MAX6105EUR+T, LP5907MFX-2.5/NOPB, INA827AIDGK, AD7175-8BCPZ-RL7 and AD8591ARTZ-REEL7. By type, the board carries 47 resistors, 45 capacitors, 13 ICs, 3 connectors, 2 diodes and 1 battery holder.

From the project

As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

Schematic settings & layout settings are described in the guide, as well as component derating.

Create your KiCad project on YOUR branch, within your current project folder.

Example Path: > 01-mainboard/mainboard_v1

Main components on the Main board v3

MAX6105EUR+TLP5907MFX-2.5/NOPBINA827AIDGKAD7175-8BCPZ-RL7AD8591ARTZ-REEL7LSF0108RKSRLT3973EMSE-5#PBFTEENSY4.1AD5689RARUZ-RL7MCP2562FD-E/SNTPS2115APWRXIAO-ESP32-S3

Main board v3 bill of materials (BOM)

113 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX6105EUR+T
IC1
1
LP5907MFX-2.5/NOPB
LP5907MFX-2.5_NOPB
IC2
2
INA827AIDGK
IC5, IC7
1
AD7175-8BCPZ-RL7
IC6
1
AD8591ARTZ-REEL7
IC8
1
LSF0108RKSR
LSF0108PWR
IC9
1
LT3973EMSE-5#PBF
IC11
1
TEENSY4.1
Teensy4.1
U1
1
AD5689RARUZ-RL7
U2
1
MCP2562FD-E/SN
U3
1
TPS2115APWR
U4
1
XIAO-ESP32-S3
U5
1
FFC Analog
J2
1
FFC Digital
J3
1
FH41-15S-0.5SH(05)
FFC Main to Peripheral
J4
1
Battery_Cell
BT1
1
749013011
T1
1
D_Schottky
D1
1
RCLAMP3354S.TCT
D2
1
15UH
15uH
L1
Show 25 more
QtyPartRefs
2
1 uF
C1, C2
32
0.1UF
0.1uF
C3, C4, C8, C9, C12, C14, C16, C17 +24
3
4.7UF
4.7uF
C10, C36, C39
2
10UF
10uF
C11, C15
2
1UF
1uF
C13, C19
1
0.47UF
0.47uF
C38
2
39PF
39pF
C51, C52
1
22UF
22uF
C61
1
10K
10k
R1
2
47
R2, R14
2
1.69K
1.69k
R3, R8
12
DNP
R4, R15, R16, R17, R18, R19, R26, R29 +4
1
680R
R5
2
1.07K
1.07k
R6, R7
1
215K
215k
R9
2
80 (0.1%)
R12, R25
1
100R
R13
6
120R (0.1%)
R20, R21, R22, R24, R38, R39
2
52.3R
R27, R28
1
20R
R33
1
200K
200k
R40
10
1.6K
1.6k
R41, R42, R43, R44, R46, R48, R49, R63 +2
1
400R
R47
1
120
R50
1
100K
100k
R60

Main board v3 design files

The KiCad project lives in the BlueJayRacing/22xt_kicad repository on GitHub; these links point at the commit this page was built from.

Main board v3: common questions

What microcontroller does the Main board v3 use?

The Main board v3 is built around the XIAO-ESP32-S3, from the ESP32 family.

How big is the Main board v3?

The Main board v3 measures 85 × 73 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Main board v3?

113 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Main board v3 design files?

From the BlueJayRacing/22xt_kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Main board v3 design in my own project?

The repository has no license, so all rights stay with BlueJayRacing. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main board v3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in 22xt_kicad

Earlier revisions in the repo: main_board_v2, main_board_v1

Similar boards