TL082CP
blurbler2·TL082CP·kicad/TL082CP/TL082CP.kicad_pcb
About the TL082CP PCB
TL082CP is an open source PCB design by blurbler2, published on GitHub. It is a 2-layer board measuring 88.6 × 75.4 mm, with 14 components from 9 distinct parts.
Other key parts include the TMR_1-1222 and TL082. By type, the board carries 6 capacitors, 3 connectors, 3 resistors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
Abschlussaufgabe der Lehrveranstaltung "Computerunterstützter Schaltungs- und Systementwurf" (CAE).
Abschlussaufgabe der Lehrveranstaltung "Computerunterstützter Schaltungs- und Systementwurf" (CAE).
Bauteil: TL082CP — Dual JFET-Input Operational Amplifier (Texas Instruments BI-FET II™)
Bauteil: TL082CP — Dual JFET-Input Operational Amplifier Bauform: Frei wählbar (gewählt: PDIP-8) Anwendung: Audio-Vorverstärker (Gitarren-Pedal)
Abgabe: Moodle-Kurs bis spätestens 05.07.2026, 23:55 Uhr

Main components on the TL082CP
TL082CP bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMR_1-1222 | Converter_DCDC_TRACO_TMR-1-xxxx_Dual_THT | U1 |
| 1 | TL082 | P8_TEX | U2 |
| 2 | AudioJack2_Switch | Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal | J1, J2 |
| 1 | PJ-102A | CUI_PJ-102A | J3 |
| 2 | 10µF | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 1 | 4,7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1Meg | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | PT01-D130D-B503 | TRIM_PT01-D130D-B503 | R3 |
TL082CP design files
The KiCad project lives in the blurbler2/TL082CP repository on GitHub; these links point at the commit this page was built from.
TL082CP: common questions
How big is the TL082CP PCB?
The TL082CP measures 88.6 × 75.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TL082CP?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the TL082CP design files?
From the blurbler2/TL082CP repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TL082CP design in my own project?
The repository has no license, so all rights stay with blurbler2. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687