HardLabs

Controller semesterprojekt

bm6t·Sememsterprojekt-grundl-ggende-styring-af-robotter·controller semesterprojekt/controller semesterprojekt.kicad_pcb

Controller semesterprojekt PCB layout, top view — open source RP2040/RP2350 board by bm6t

About the Controller semesterprojekt PCB

Controller semesterprojekt is an open source RP2040/RP2350 PCB design by bm6t, published on GitHub. It is a 2-layer board measuring 50 × 100 mm, with 11 components from 6 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 5 connectors, 3 diodes and 3 resistors.

It belongs with the robotics & motion designs in this gallery.

Controller semesterprojekt bill of materials (BOM)

11 components, 6 distinct parts.

QtyPartRefs
2
Joystick
J1, J2
1
Screw_Terminal_01x02
J3
1
Pico
J4
1
Conn_01x04_MountingPin
J5
3
LED
D1, D2, D3
3
R
R1, R2, R3

Controller semesterprojekt design files

The KiCad project lives in the bm6t/Sememsterprojekt-grundl-ggende-styring-af-robotter repository on GitHub; these links point at the commit this page was built from.

Controller semesterprojekt: common questions

What microcontroller does the Controller semesterprojekt use?

The Controller semesterprojekt is built around the Pico, from the RP2040/RP2350 family.

How big is the Controller semesterprojekt PCB?

The Controller semesterprojekt measures 50 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller semesterprojekt?

11 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller semesterprojekt design files?

From the bm6t/Sememsterprojekt-grundl-ggende-styring-af-robotter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Controller semesterprojekt design in my own project?

The repository has no license, so all rights stay with bm6t. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller semesterprojekt without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Sememsterprojekt-grundl-ggende-styring-af-robotter

Similar boards