HardLabs

KiCad OLED and button

bm6t·Sememsterprojekt-grundl-ggende-styring-af-robotter·kiCad_OLED_and_button/kiCad_OLED_and_button.kicad_pcb

KiCad OLED and button PCB layout, top view — open source RP2040/RP2350 board by bm6t

About the KiCad OLED and button PCB

KiCad OLED and button is an open source RP2040/RP2350 PCB design by bm6t, published on GitHub. It is a 2-layer board measuring 52.5 × 32.5 mm, with 6 components from 4 distinct parts.

Its main chip is the PICO pins, from the RP2040/RP2350 family. By type, the board carries 3 connectors and 3 switches.

It belongs with the robotics & motion and displays & leds designs in this gallery.

KiCad OLED and button bill of materials (BOM)

6 components, 4 distinct parts.

QtyPartRefs
1
OLED
J1
1
POWER and GND
J2
1
PICO pins
J3
3
SW_Push
SW1, SW2, SW3

KiCad OLED and button design files

The KiCad project lives in the bm6t/Sememsterprojekt-grundl-ggende-styring-af-robotter repository on GitHub; these links point at the commit this page was built from.

KiCad OLED and button: common questions

What microcontroller does the KiCad OLED and button use?

The KiCad OLED and button is built around the PICO pins, from the RP2040/RP2350 family.

How big is the KiCad OLED and button PCB?

The KiCad OLED and button measures 52.5 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KiCad OLED and button?

6 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the KiCad OLED and button design files?

From the bm6t/Sememsterprojekt-grundl-ggende-styring-af-robotter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the KiCad OLED and button design in my own project?

The repository has no license, so all rights stay with bm6t. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KiCad OLED and button without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Sememsterprojekt-grundl-ggende-styring-af-robotter

Similar boards