GP2Y0D8xxZ0F
About the GP2Y0D8xxZ0F PCB
GP2Y0D8xxZ0F is an open source PCB design by bobboteck, published on GitHub under the MIT license. It is a 2-layer board measuring 26.7 × 24.1 mm, with 9 components from 8 distinct parts.
Other key parts include the GP2Y0D81xZ0F. By type, the board carries 3 capacitors, 2 resistors, 1 IC, 1 connector, 1 jumper and 1 diode.
It belongs with the sensors designs in this gallery.
From the project
A board for SHARP sensor GP2Y0D805Z0F, GP2Y0D810Z0F and GP2Y0D815Z0F
I had bought some of these sensors with a friend, without taking them with boards that are easily found on the online store, because we had the need for stable fixing points, that these models did not guarantee. Then we decided to create a board for PTH components, but on the way, thanks to some of KiCAD libraries and others that I have modified, I have designed the board so it could also be assembled with SMD components.
Main components on the GP2Y0D8xxZ0F
GP2Y0D8xxZ0F bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GP2Y0D81xZ0F | GP2Y0D81xZ0F | U1 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | P1 |
| 1 | Jumper_NO_Small | R_0201 | JP1 |
| 1 | Led | LED_1206_3MM | D1 |
| 2 | 0.1uF | C_1210_HandSoldering_100n | C1, C2 |
| 1 | 4.7uF | C_1210_HandSoldering_100n | C3 |
| 1 | 4.3 | Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R1 |
| 1 | 1K | Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R2 |
GP2Y0D8xxZ0F design files
The KiCad project lives in the bobboteck/GP2Y0D8xxZ0F repository on GitHub; these links point at the commit this page was built from.
GP2Y0D8xxZ0F: common questions
How big is the GP2Y0D8xxZ0F PCB?
The GP2Y0D8xxZ0F measures 26.7 × 24.1 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the GP2Y0D8xxZ0F?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the GP2Y0D8xxZ0F design files?
From the bobboteck/GP2Y0D8xxZ0F repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the GP2Y0D8xxZ0F design in my own project?
Yes, under the terms of its MIT license, which bobboteck chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956