Jukebox

boernerc20·jukebox·1.Hardware/jukebox.kicad_pcb

Jukebox PCB layout, top view — open source ESP32 board by boernerc20

About the Jukebox PCB

Jukebox is an open source ESP32 PCB design by boernerc20, published on GitHub. It is a 2-layer board measuring 68.1 × 59.9 mm, with 52 components from 30 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-Axx-xQFN28, MAX98357A and AMS1117-3.3. By type, the board carries 16 resistors, 15 capacitors, 6 diodes, 4 connectors, 3 ICs and 2 transistors.

From the project

Minecraft Jukebox Replica using RFID and ESP32

Electronics are finished and ready for jukebox enclosure:

Jukebox, from the project README
From the project README

Main components on the Jukebox

Jukebox bill of materials (BOM)

52 components, 30 distinct parts.

QtyPartRefs
1
CP2102N-Axx-xQFN28
U1
1
MAX98357A
U2
1
AMS1117-3.3
U4
2
SS8050
Q1, Q2
1
USB_C_Receptacle_USB2.0_16P
J1
1
S4B-XH-A
J2
1
B3B-XH-A
J3
1
Conn_01x10_Socket
J5
1
8Ω
LS1
1
10k
RV2
2
SW_Push
SW1, SW2
1
LED
D1
1
ESP32-WROOM-32
D2
1
D_Schottky
D3
3
D
D4, D5, D6
1
Ferrite (600ohm @ 100MHz)
FB1
1
Ferrite
FB2
1
100n
C1
2
10u
C3, C5
1
0.1u
C6
Show 10 more
QtyPartRefs
2
220p
C7, C8
5
0.1 uF/50V
C9, C14, C15, C19, C22
3
22 uF/10V
C10, C11, C21
1
4.7 uF/6.3V
C20
8
10k
R2, R3, R4, R5, R11, R21, R22, R23
2
2k
R7, R24
2
5.1k
R8, R12
2
0R
R17, R18
1
22.1k
R25
1
47.5k
R26

Jukebox design files

The KiCad project lives in the boernerc20/jukebox repository on GitHub; these links point at the commit this page was built from.

Jukebox: common questions

What microcontroller does the Jukebox use?

The Jukebox is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Jukebox PCB?

The Jukebox measures 68.1 × 59.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jukebox?

52 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jukebox design files?

From the boernerc20/jukebox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Jukebox design in my own project?

The repository has no license, so all rights stay with boernerc20. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Jukebox without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards