HardLabs

Pc-Control-Panel

BraveError·Pc-Control-Panel·Computer Control Panel/PCB/Computer_Control_Panel.kicad_pcb

Pc-Control-Panel PCB layout, top view — open source RP2040/RP2350 board by BraveError

About the Pc-Control-Panel PCB

Pc-Control-Panel is an open source RP2040/RP2350 PCB design by BraveError, published on GitHub. It is a 2-layer board measuring 100 × 68 mm, with 19 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 10 diodes, 6 switches, 1 IC and 1 LED.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

A hackpad for Hack Club Blueprint. Has 6 shortcut keys, an OLED display, and a volume know with leds to show volume.

Main components on the Pc-Control-Panel

XIAO-RP2040-DIP

Pc-Control-Panel bill of materials (BOM)

19 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
EC11E Encoder
E1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
Oled Panel
1
10
SK6812MINI
D1, D2, D3, D4, D5, D6, D7, D8 +2

Pc-Control-Panel design files

The KiCad project lives in the BraveError/Pc-Control-Panel repository on GitHub; these links point at the commit this page was built from.

Pc-Control-Panel: common questions

What microcontroller does the Pc-Control-Panel use?

The Pc-Control-Panel is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Pc-Control-Panel PCB?

The Pc-Control-Panel measures 100 × 68 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pc-Control-Panel?

19 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pc-Control-Panel design files?

From the BraveError/Pc-Control-Panel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pc-Control-Panel design in my own project?

The repository has no license, so all rights stay with BraveError. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pc-Control-Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards