MaChip
brgyplrm·MaChip·firmware/MACHIP3.0/MACHIP3.0.kicad_pcb
About the MaChip PCB
MaChip is an open source ESP32 PCB design by brgyplrm, published on GitHub. It is a 2-layer board measuring 111.5 × 101 mm, with 62 components from 29 distinct parts.
Its main chip is the ESP32-DEVKIT-38PIN, from the ESP32 family. Other key parts include the LM7805L-TF3-T, RT9080-33GJ5 and ESDSRV05-4H. By type, the board carries 22 capacitors, 19 resistors, 8 connectors, 5 ICs, 4 diodes and 2 transistors.
From the project
This directory contains the official KiCad 8/10 hardware design files, production Gerbers, bill of materials (BOM), and assembly guides for the MACHIP 3.0 Access Control Terminal.
This directory contains the official KiCad 8/10 hardware design files, production Gerbers, bill of materials (BOM), and assembly guides for the MACHIP 3.0 Access Control Terminal.
- KiCad Project File: MACHIP3.0.kicadpro - Schematic File: MACHIP3.0.kicadsch - PCB Layout File: MACHIP3.0.kicadpcb - Production Gerbers (JLCPCB Ready): MACHIP3.0JLCPCBREADY.zip - Verified Component BOM (LCSC): MACHIP3.0JLCPCBBOMCORRECTED.csv - Hardware Assembly & Bring-Up Guide: MACHIP3HARDWAREBRINGUPANDASSEMBLYGUIDE.md - Pre-Fab Engineering Audit Report: MACHIP3PCBLAYOUTAUDITREPORT.md`
Main components on the MaChip
MaChip bill of materials (BOM)
62 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805L-TF3-T LM7805 | TO-220-3_Vertical | U1 |
| 1 | ESP32-DEVKIT-38PIN | ESP32-DEVKIT-38PIN | U2 |
| 1 | RT9080-33GJ5 | SOT-23-5 | U3 |
| 2 | ESDSRV05-4H ESDSRV05-4 | SOT-23-6 | U4, U5 |
| 1 | AO3401MI-MS AO3401 | SOT-23 | Q1 |
| 1 | 2N2222A PN2222A | TO-92_Inline | Q2 |
| 1 | DC-005D-1-2.0-PU-B-SP Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | MFRC522_INSIDE | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J2 |
| 1 | MFRC522_OUTSIDE | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J3 |
| 1 | C157932 TFT_OUTSIDE | JST_XH_B9B-XH-A_1x09_P2.50mm_Vertical | J4 |
| 1 | C157932 TFT_INSIDE | JST_XH_B9B-XH-A_1x09_P2.50mm_Vertical | J5 |
| 1 | FINGERPRINT_R307 FingerPrint_R307 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | BUZZER-MODULE-JST3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | RELAY-MODULE-JST3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | RXEF110-2 RXEF110 | Fuse_Bourns_MF-RHT100 | F1 |
| 1 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm | TP_GND1 |
| 1 | BZT52C10 D_Zener | D_SOD-123 | D1 |
| 1 | SMBJ10CA | D_SMB | D2 |
| 2 | LED | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D3, D4 |
| 4 | 100UF 100uf | CP_Radial_D6.3mm_P2.50mm | C1, C16, C17, C20 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 1uf | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 10 | 100NF 100nf | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C5, C7, C8, C9, C11, C13, C15 +2 |
| 7 | 10UF 10uf | CP_Radial_D5.0mm_P2.50mm | C4, C6, C10, C12, C14, C18, C21 |
| 10 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R11 +2 |
| 1 | 68 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 3 | 22 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R18, R19 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R16 |
MaChip design files
The KiCad project lives in the brgyplrm/MaChip repository on GitHub; these links point at the commit this page was built from.
MaChip: common questions
What microcontroller does the MaChip use?
The MaChip is built around the ESP32-DEVKIT-38PIN, from the ESP32 family.
How big is the MaChip PCB?
The MaChip measures 111.5 × 101 mm, has 2 copper layers and is 1.59 mm thick.
How many components are on the MaChip?
62 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MaChip design files?
From the brgyplrm/MaChip repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MaChip design in my own project?
The repository has no license, so all rights stay with brgyplrm. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MaChip without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k