Board-A-mcx
Brunner-neutrino-lab·ets-breakout·boards/board-A-mcx/board-A-mcx.kicad_pcb
About the Board-A-mcx
Board-A-mcx is an open source PCB design by Brunner-neutrino-lab, published on GitHub. It is a 4-layer board measuring 74.8 × 125.1 mm, with 26 components from 2 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Passive break-out boards that replace the (broken) iv-pulse-mux board in the Brunner-lab ETS-96-channel-IV-pulse-mux system. Instead of relay-multiplexing 24 channels onto one shared sense line, each breakout board brings every channel out to its own coaxial jack so channels can
Passive break-out boards that replace the (broken) iv-pulse-mux board in the Brunner-lab ETS-96-channel-IV-pulse-mux system. Instead of relay-multiplexing 24 channels onto one shared sense line, each breakout board brings every channel out to its own coaxial jack so channels can be biased/measured individually with external instruments.
- Mates the detector-side connector QSE-040-01-L-D-A (J5) — same socket the iv-pulse-mux board used, mating the existing QTE-040 header upstream. J5 sits on the back face (B.Cu), opposite the jacks: the detector plugs into the back, cables come off the front.…
Board-A-mcx bill of materials (BOM)
26 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | QSE-040-01-L-D-A SAMTEC_QSE-040-01-X-D-A Samtec | SAMTEC_QSE-040-01-X-D-A | J5 |
| 25 | MCX-J-P-H-ST-TH1 Samtec_MCX-J-P-H-ST-TH1 Samtec | Samtec_MCX-J-P-H-ST-TH1 | J6, J7, J8, J9, J10, J11, J12, J13 +17 |
Board-A-mcx design files
The KiCad project lives in the Brunner-neutrino-lab/ets-breakout repository on GitHub; these links point at the commit this page was built from.
Board-A-mcx: common questions
How big is the Board-A-mcx?
The Board-A-mcx measures 74.8 × 125.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Board-A-mcx?
26 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Board-A-mcx design files?
From the Brunner-neutrino-lab/ets-breakout repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Board-A-mcx design in my own project?
The repository has no license, so all rights stay with Brunner-neutrino-lab. Use it as a reference, and ask the author before reusing the design.
More boards in ets-breakout
Iv pulse mux
Brunner-neutrino-lab
300 × 120 mm418 parts4LNo license0Board-D-smp
Brunner-neutrino-lab
75.1 × 120 mm25 parts4LNo license0Board-C-ufl
Brunner-neutrino-lab
69.7 × 99 mm25 parts4LNo license0Board-B-sma
Brunner-neutrino-lab
74.8 × 149.1 mm25 parts4LNo license0AVR/Arduino
Iv pulse motherboard
Brunner-neutrino-lab
140 × 140 mm18 parts2LNo license0
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979