Board-D-smp
About the Board-D-smp
Board-D-smp is an open source PCB design by Brunner-neutrino-lab, published on GitHub. It is a 4-layer board measuring 75.1 × 120 mm, with 25 components from 2 distinct parts.
By type, the board carries 24 relays and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Passive break-out boards that replace the (broken) iv-pulse-mux board in the Brunner-lab ETS-96-channel-IV-pulse-mux system. Instead of relay-multiplexing 24 channels onto one shared sense line, each breakout board brings every channel out to its own coaxial jack so channels can
Passive break-out boards that replace the (broken) iv-pulse-mux board in the Brunner-lab ETS-96-channel-IV-pulse-mux system. Instead of relay-multiplexing 24 channels onto one shared sense line, each breakout board brings every channel out to its own coaxial jack so channels can be biased/measured individually with external instruments.
- Mates the detector-side connector QSE-040-01-L-D-A (J5) — same socket the iv-pulse-mux board used, mating the existing QTE-040 header upstream. J5 sits on the back face (B.Cu), opposite the jacks: the detector plugs into the back, cables come off the front.…
Board-D-smp bill of materials (BOM)
25 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | QSE-040-01-L-D-A SAMTEC_QSE-040-01-X-D-A Samtec | SAMTEC_QSE-040-01-X-D-A | J5 |
| 24 | SMP-MSLD-PCS-20 SMP_Amphenol_SMP-MSLD-PCS-20 Amphenol RF | SMP_Amphenol_SMP-MSLD-PCS-20 | K0, K1, K2, K3, K4, K5, K6, K7 +16 |
Board-D-smp design files
The KiCad project lives in the Brunner-neutrino-lab/ets-breakout repository on GitHub; these links point at the commit this page was built from.
Board-D-smp: common questions
How big is the Board-D-smp?
The Board-D-smp measures 75.1 × 120 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Board-D-smp?
25 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Board-D-smp design files?
From the Brunner-neutrino-lab/ets-breakout repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Board-D-smp design in my own project?
The repository has no license, so all rights stay with Brunner-neutrino-lab. Use it as a reference, and ask the author before reusing the design.
More boards in ets-breakout
Iv pulse mux
300 × 120 mm418 parts4LNo license0
Board-A-mcx
74.8 × 125.1 mm26 parts4LNo license0
Board-B-sma
74.8 × 149.1 mm25 parts4LNo license0
Board-C-ufl
69.7 × 99 mm25 parts4LNo license0
AVR/ArduinoIv pulse motherboard
140 × 140 mm18 parts2LNo license0
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446