HardLabs

Iv pulse mux

Brunner-neutrino-lab·ets-breakout·reference/ETS-96-channel-IV-pulse-mux/iv-pulse-mux.kicad_pcb

Iv pulse mux PCB layout, top view — open source board by Brunner-neutrino-lab
Simulate this board

About the Iv pulse mux PCB

Iv pulse mux is an open source PCB design by Brunner-neutrino-lab, published on GitHub. It is a 4-layer board measuring 300 × 120 mm, with 418 components from 26 distinct parts.

Other key parts include the MIC5891YWM-TR, CD74HCT4051M96 and TLP3149(TP,F. By type, the board carries 215 resistors, 57 capacitors, 53 diodes, 28 ICs, 26 relays and 25 inductors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Organization: McGill University Physics – Electronic Design Support Group Designer: Eamon Egan Schematic Date: 2019-11-12 (Rev 1.0) Design Tool: KiCad 9.0

Organization: McGill University Physics – Electronic Design Support Group Designer: Eamon Egan Schematic Date: 2019-11-12 (Rev 1.0) Design Tool: KiCad 9.0

This repository contains the complete design files for a 96-channel I-V curve pulse multiplexer used in detector physics instrumentation. The system routes bias voltage and sense signals to one of 96 detector channels (e.g., SiPMs or similar devices) under Arduino microcontroller command, enabling automated current-voltage (I-V) characterization of large detector arrays.

Main components on the Iv pulse mux

MIC5891YWM-TRCD74HCT4051M96TLP3149(TP,F

Iv pulse mux bill of materials (BOM)

418 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
MIC5891YWM-TR
MIC5891
U1, U2, U3
1
CD74HCT4051M96
4051
U4
24
TLP3149(TP,F
TLP3149
U5, U6, U7, U8, U9, U10, U11, U12 +16
2
G1003A
Q1, Q2
2
0733660061
Conn_Coaxial
J1, J4
1
QSE-040-01-L-D-A
J5
2
61300211121
Jumper_2_Open
JP1, JP2
3
Jumper_2_Small_Bridged
JP3, JP4, JP5
2
HI12-1A85
K1, K2
24
DIP12-2A72-21D
K3, K4, K5, K6, K7, K8, K9, K10 +16
4
32207638
PT1000
TH1, TH2, TH3, TH4
2
1N4148W-TP
1N4148W
D1, D2
51
BAP65-02,115
D3, D4, D5, D6, D7, D8, D9, D10 +43
25
MLZ1608M100WT000
10uH
L1, L2, L3, L4, L5, L6, L7, L8 +17
9
CL21B104KBCNNNC
0.1uF
C1, C2, C3, C20, C21, C38, C39, C56 +1
24
C1608C0G2A103K080AC
10nF 100V NP0
C4, C6, C8, C10, C12, C14, C16, C18 +16
24
HMK107BJ224MA-TE
0.22uF 100V X5R
C5, C7, C9, C11, C13, C15, C17, C19 +16
73
RC0603FR-0710KL
10k
R1, R9, R10, R14, R15, R19, R20, R24 +65
25
RC0603FR-13499RL
499
R2, R8, R13, R18, R23, R28, R33, R38 +17
33
ERJ-3EKF1003V
100k
R3, R4, R6, R7, R48, R49, R90, R91 +25
Show 6 more
QtyPartRefs
1
ERA-3ARB102V
1k 0.1% 10ppm/K
R5
24
RC0805FR-07100KL
100k 0805
R11, R16, R21, R26, R31, R36, R41, R46 +16
24
ERJ-3EKF1004V
1Meg
R12, R17, R22, R27, R32, R37, R42, R47 +16
3
ERJ-3EKF10R0V
10
R132, R133, R134
25
RC0603JR-075K6L
5.6k
R135, R214, R215, R216, R217, R218, R219, R220 +17
7
ERA-3ARB472V
4.7k 0.1% 10ppm/K
R136, R159, R161, R162, R163, R164, R165

Iv pulse mux design files

The KiCad project lives in the Brunner-neutrino-lab/ets-breakout repository on GitHub; these links point at the commit this page was built from.

Iv pulse mux: common questions

How big is the Iv pulse mux PCB?

The Iv pulse mux measures 300 × 120 mm, has 4 copper layers and is 1.547 mm thick.

How many components are on the Iv pulse mux?

418 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Iv pulse mux design files?

From the Brunner-neutrino-lab/ets-breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Iv pulse mux design in my own project?

The repository has no license, so all rights stay with Brunner-neutrino-lab. Use it as a reference, and ask the author before reusing the design.

More boards in ets-breakout

Similar boards