Flex-VEMD
About the Flex-VEMD PCB
Flex-VEMD is an open source PCB design by BUNPC, published on GitHub. It is a 2-layer board measuring 360 × 8.9 mm, with 4 components from 4 distinct parts.
Other key parts include the ADPD2210. By type, the board carries 1 IC, 1 connector, 1 diode and 1 capacitor.
From the project
Repository for the storage and dissemination of NN22 technical documents
All detector related files are located within this folder.
Two versions of the backplane are available, the 6 layer and single layer. The 6 layer folder contains the files for the full height backplane to allow for up to 6 detector interface cards to be connected and the single layer folder contains the files for the system configuration with only one interface card per backboard slot.
Main components on the Flex-VEMD
Flex-VEMD bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADPD2210 | LFCSP-6-2x2mm | U1 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P1.27mm_compact | J1 |
| 1 | VEMD5160X01 | VEMD-4-4.1x5.2mm | D1 |
| 1 | CL32B106KOULNNE 0.1uF Samsung | C_0402_1005Metric | C1 |
Flex-VEMD design files
The KiCad project lives in the BUNPC/NN22-Technical-Documents repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware Main/Electronics/Detector Electronics/DET_Optode/flex-VEMD/flex-VEMD.kicad_pcb
- SchematicHardware Main/Electronics/Detector Electronics/DET_Optode/flex-VEMD/flex-VEMD.kicad_sch
- BOMHardware Peripherial/ninjaNIRS Triggerbox/hardware/Rev1a_Eagle/T-Y16W206116A W206116ASY15-10sets-TriggerBox_Rev1a_BOM-Elsa2020.11.23.xlsx
Flex-VEMD: common questions
How big is the Flex-VEMD PCB?
The Flex-VEMD measures 360 × 8.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flex-VEMD?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flex-VEMD design files?
From the BUNPC/NN22-Technical-Documents repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flex-VEMD design in my own project?
The repository has no license, so all rights stay with BUNPC. Use it as a reference, and ask the author before reusing the design.
