25 open source boards using the TXB0104D

Real designs built with the TXB0104D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the TXB0104D

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the TXB0104D connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 15 of 23 designs, most often 100 nF (then 1 µF).
  • The VCCA pin has a decoupling capacitor on 14 of 23 designs, most often 100 nF (then 1 µF).
  • The OE pin is tied to 3.3V on 15 of 23 designs (a signal on 8).
VCCApin 1Connected to: 3.3V 91%
  • Decoupling capacitor on 61% · 100 nF (16), 1 µF (1)
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7Connected to: GND 96%
OEpin 8Connected to: 3.3V 65% · a signal 35%
B2pin 12Connected to: A connector 43%, the microcontroller 39%
  • Series resistor on 30% · 1 kΩ (3), 0 Ω (1), 10 Ω (1)
VCCBpin 14Connected to: 5V 87%
  • Decoupling capacitor on 65% · 100 nF (14), 1 µF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include X1 by embeddedalpha, DonCon2040 by ravinrabbid, Bellwether by floren and Main by LouiseLeciak.

The TXB0104D in open source designs

The gallery holds 25 open source boards using the TXB0104D from 23 GitHub repositories; a typical one measures about 96.5 × 80 mm and carries around 62 components.

96% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.

The most starred is X1 by embeddedalpha.

Microcontrollers on boards using the TXB0104D

TXB0104D: common questions

Where can I find a TXB0104D reference design?

Each of the 25 boards on this page is a real design using the TXB0104D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0104D VCCB pin?

The VCCB pin has a decoupling capacitor on 15 of 23 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 23 open source designs using the TXB0104D.

What decoupling capacitors do designs use on the TXB0104D VCCA pin?

The VCCA pin has a decoupling capacitor on 14 of 23 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 23 open source designs using the TXB0104D.

How is the TXB0104D OE pin connected?

The OE pin is tied to 3.3V on 15 of 23 designs (a signal on 8). Counted from the KiCad layouts of 23 open source designs using the TXB0104D.

What parts are used alongside the TXB0104D?

The DS3231N, ADXL345, ATMEGA328-AU-ND, BEAGLEBONE and CAT24C256 appear in the most repositories here.

Which microcontrollers do boards using the TXB0104D use?

Most are built on AVR/Arduino (10), ESP32 (2), NXP (2) and RP2040/RP2350 (2).

How big is a typical board using the TXB0104D?

The median is 96.5 × 80 mm, and 96% are two-layer designs.

What is the most popular open source board using the TXB0104D?

By GitHub stars, X1 by embeddedalpha, with 75 stars.

Can I simulate one of these boards using the TXB0104D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part