HardLabs

Bilals-Pad

Bxald·Bilals-Pad·PCB/MacroPad Final PCB .kicad_pcb

Bilals-Pad PCB layout, top view — open source RP2040/RP2350 board by Bxald

About the Bilals-Pad PCB

Bilals-Pad is an open source RP2040/RP2350 PCB design by Bxald, published on GitHub. It is a 2-layer board measuring 62.2 × 73.7 mm, with 9 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 7 switches, 1 IC and 1 LED.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Custom 6-key macropad using Seeed XIAO RP2040 with rotary encoder and 128×64 OLED. Features direct keys, volume control, mute button, and dynamic OLED feedback. Fully macro-ready with KMK firmware for easy key remapping and custom sequences.

Main components on the Bilals-Pad

XIAO-RP2040-DIP

Bilals-Pad bill of materials (BOM)

9 components, 4 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
1
RotaryEncoder_Switch
SW7
1
OLED-128O064D
DS1

Bilals-Pad design files

The KiCad project lives in the Bxald/Bilals-Pad repository on GitHub; these links point at the commit this page was built from.

Bilals-Pad: common questions

What microcontroller does the Bilals-Pad use?

The Bilals-Pad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Bilals-Pad PCB?

The Bilals-Pad measures 62.2 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bilals-Pad?

9 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bilals-Pad design files?

From the Bxald/Bilals-Pad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Bilals-Pad design in my own project?

The repository has no license, so all rights stay with Bxald. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bilals-Pad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards