HardLabs

Pcb tile game tile aaa

bytesizedengineering·PCB-tile-based-game·Electrical Design/pcb_tile_game_tile_aaa/pcb_tile_game_tile_aaa.kicad_pcb

Pcb tile game tile aaa layout, top view — open source AVR/Arduino board by bytesizedengineering

About the Pcb tile game tile aaa

Pcb tile game tile aaa is an open source AVR/Arduino PCB design by bytesizedengineering, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 69.3 × 60 mm, with 34 components from 7 distinct parts.

Its main chip is the ATtiny3217-M, from the AVR/Arduino family. By type, the board carries 14 capacitors, 12 LEDs, 6 connectors, 1 IC and 1 resistor.

From the project

🧰 What You Need - Adafruit UPDI Friend - Arduino IDE - ATtiny3217 board - USB-C cable 1. Install MegaTinyCore 2. Select the Board 3. Connect the UPDI Friend 4. Select the Serial Port 5. Upload Code

Pcb tile game tile aaa, from the project README
From the project README

Main components on the Pcb tile game tile aaa

ATtiny3217-M

Pcb tile game tile aaa bill of materials (BOM)

34 components, 7 distinct parts.

QtyPartRefs
1
ATtiny3217-M
U2
3
Conn_01x05_Pin
J1, J3, J5
3
Conn_01x05_Socket
J2, J4, J6
12
SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +4
13
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +5
1
1uF
C13
1
DNP
R1

Pcb tile game tile aaa design files

The KiCad project lives in the bytesizedengineering/PCB-tile-based-game repository on GitHub; these links point at the commit this page was built from.

Pcb tile game tile aaa: common questions

What microcontroller does the Pcb tile game tile aaa use?

The Pcb tile game tile aaa is built around the ATtiny3217-M, from the AVR/Arduino family.

How big is the Pcb tile game tile aaa?

The Pcb tile game tile aaa measures 69.3 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb tile game tile aaa?

34 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb tile game tile aaa design files?

From the bytesizedengineering/PCB-tile-based-game repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb tile game tile aaa design in my own project?

Yes, under the terms of its GPL-3.0 license, which bytesizedengineering chose for the repository.

Can I test firmware for the Pcb tile game tile aaa without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB-tile-based-game

Similar boards