HardLabs

Pcb tile game tile ooo

bytesizedengineering·PCB-tile-based-game·Electrical Design/pcb_tile_game_tile_ooo/pcb_tile_game_tile_ooo.kicad_pcb

Pcb tile game tile ooo layout, top view — open source AVR/Arduino board by bytesizedengineering

About the Pcb tile game tile ooo

Pcb tile game tile ooo is an open source AVR/Arduino PCB design by bytesizedengineering, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 69.3 × 60 mm, with 42 components from 7 distinct parts.

Its main chip is the ATtiny3217-M, from the AVR/Arduino family. By type, the board carries 18 capacitors, 16 LEDs, 6 connectors, 1 IC and 1 resistor.

From the project

🧰 What You Need - Adafruit UPDI Friend - Arduino IDE - ATtiny3217 board - USB-C cable 1. Install MegaTinyCore 2. Select the Board 3. Connect the UPDI Friend 4. Select the Serial Port 5. Upload Code

Pcb tile game tile ooo, from the project README
From the project README

Main components on the Pcb tile game tile ooo

ATtiny3217-M

Pcb tile game tile ooo bill of materials (BOM)

42 components, 7 distinct parts.

QtyPartRefs
1
ATtiny3217-M
U2
3
Conn_01x05_Pin
J1, J3, J5
3
Conn_01x05_Socket
J2, J4, J6
16
SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +8
17
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +9
1
1uF
C17
1
DNP
R1

Pcb tile game tile ooo design files

The KiCad project lives in the bytesizedengineering/PCB-tile-based-game repository on GitHub; these links point at the commit this page was built from.

Pcb tile game tile ooo: common questions

What microcontroller does the Pcb tile game tile ooo use?

The Pcb tile game tile ooo is built around the ATtiny3217-M, from the AVR/Arduino family.

How big is the Pcb tile game tile ooo?

The Pcb tile game tile ooo measures 69.3 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb tile game tile ooo?

42 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb tile game tile ooo design files?

From the bytesizedengineering/PCB-tile-based-game repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb tile game tile ooo design in my own project?

Yes, under the terms of its GPL-3.0 license, which bytesizedengineering chose for the repository.

Can I test firmware for the Pcb tile game tile ooo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB-tile-based-game

Similar boards