HardLabs

Pcb tile game tile ssa

bytesizedengineering·PCB-tile-based-game·Electrical Design/pcb_tile_game_tile_ssa/pcb_tile_game_tile_ssa.kicad_pcb

Pcb tile game tile ssa layout, top view — open source AVR/Arduino board by bytesizedengineering

About the Pcb tile game tile ssa

Pcb tile game tile ssa is an open source AVR/Arduino PCB design by bytesizedengineering, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 69.3 × 60 mm, with 36 components from 7 distinct parts.

Its main chip is the ATtiny3217-M, from the AVR/Arduino family. By type, the board carries 15 capacitors, 13 LEDs, 6 connectors, 1 IC and 1 resistor.

From the project

🧰 What You Need - Adafruit UPDI Friend - Arduino IDE - ATtiny3217 board - USB-C cable 1. Install MegaTinyCore 2. Select the Board 3. Connect the UPDI Friend 4. Select the Serial Port 5. Upload Code

Pcb tile game tile ssa, from the project README
From the project README

Main components on the Pcb tile game tile ssa

ATtiny3217-M

Pcb tile game tile ssa bill of materials (BOM)

36 components, 7 distinct parts.

QtyPartRefs
1
ATtiny3217-M
U2
3
Conn_01x05_Pin
J1, J3, J5
3
Conn_01x05_Socket
J2, J4, J6
13
SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +5
14
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +6
1
1uF
C14
1
DNP
R1

Pcb tile game tile ssa design files

The KiCad project lives in the bytesizedengineering/PCB-tile-based-game repository on GitHub; these links point at the commit this page was built from.

Pcb tile game tile ssa: common questions

What microcontroller does the Pcb tile game tile ssa use?

The Pcb tile game tile ssa is built around the ATtiny3217-M, from the AVR/Arduino family.

How big is the Pcb tile game tile ssa?

The Pcb tile game tile ssa measures 69.3 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb tile game tile ssa?

36 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb tile game tile ssa design files?

From the bytesizedengineering/PCB-tile-based-game repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb tile game tile ssa design in my own project?

Yes, under the terms of its GPL-3.0 license, which bytesizedengineering chose for the repository.

Can I test firmware for the Pcb tile game tile ssa without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB-tile-based-game

Similar boards