RPi Hat SMD
CameronBrooks11·rpi-hat-kicad·RPi_Hat_SMD/RPi_Hat_SMD.kicad_pcb
About the RPi Hat SMD
RPi Hat SMD is an open source PCB design by CameronBrooks11, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56.5 mm, with 6 components from 5 distinct parts.
Other key parts include the CAT24C32. By type, the board carries 3 resistors, 1 IC, 1 connector and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCad 10 project templates for a Raspberry Pi HAT: through-hole and SMD GPIO connector variants.
KiCad 10 project templates for a Raspberry Pi HAT+: the board outline, mounting holes, 40-pin GPIO connector and the ID EEPROM a HAT+ needs, placed, routed and passing DRC, ready to design on.
Each template has the outline from Raspberry Pi's HAT mechanical drawing, four mounting holes, the GPIO connector J1 with its power pins wired and a global label (GPIO2 to GPIO27) on every other GPIO pin, and the HAT+ ID EEPROM placed and routed beside J1. Each carries its own RPiHat` libraries, so a project opens without installing anything.

Main components on the RPi Hat SMD
RPi Hat SMD bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAT24C32 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | RPi_GPIO | Samtec_HLE-120-02-XXX-DV-BE-XX-XX | J1 |
| 1 | 100n | C_0603_1608Metric | C1 |
| 2 | 3.9k | R_0603_1608Metric | R1, R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
RPi Hat SMD design files
The KiCad project lives in the CameronBrooks11/rpi-hat-kicad repository on GitHub; these links point at the commit this page was built from.
RPi Hat SMD: common questions
How big is the RPi Hat SMD?
The RPi Hat SMD measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RPi Hat SMD?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the RPi Hat SMD design files?
From the CameronBrooks11/rpi-hat-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RPi Hat SMD design in my own project?
Yes, under the terms of its MIT license, which CameronBrooks11 chose for the repository.
More boards in rpi-hat-kicad
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979