RPi Hat THT

CameronBrooks11·rpi-hat-kicad·RPi_Hat_THT/RPi_Hat_THT.kicad_pcb

RPi Hat THT layout, top view — open source board by CameronBrooks11

About the RPi Hat THT

RPi Hat THT is an open source PCB design by CameronBrooks11, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56 mm, with 6 components from 5 distinct parts.

Other key parts include the CAT24C32. By type, the board carries 3 resistors, 1 IC, 1 connector and 1 capacitor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

KiCad 10 project templates for a Raspberry Pi HAT: through-hole and SMD GPIO connector variants.

KiCad 10 project templates for a Raspberry Pi HAT+: the board outline, mounting holes, 40-pin GPIO connector and the ID EEPROM a HAT+ needs, placed, routed and passing DRC, ready to design on.

Each template has the outline from Raspberry Pi's HAT mechanical drawing, four mounting holes, the GPIO connector J1 with its power pins wired and a global label (GPIO2 to GPIO27) on every other GPIO pin, and the HAT+ ID EEPROM placed and routed beside J1. Each carries its own RPiHat` libraries, so a project opens without installing anything.

RPi Hat THT, from the project README
From the project README

Main components on the RPi Hat THT

RPi Hat THT bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
CAT24C32
U1
1
RPi_GPIO
J1
1
100n
C1
2
3.9k
R1, R2
1
1k
R3

RPi Hat THT design files

The KiCad project lives in the CameronBrooks11/rpi-hat-kicad repository on GitHub; these links point at the commit this page was built from.

RPi Hat THT: common questions

How big is the RPi Hat THT?

The RPi Hat THT measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RPi Hat THT?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the RPi Hat THT design files?

From the CameronBrooks11/rpi-hat-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RPi Hat THT design in my own project?

Yes, under the terms of its MIT license, which CameronBrooks11 chose for the repository.

More boards in rpi-hat-kicad

Similar boards