Esp32-620r
carlonluca·esp32-620r·kicad/esp32-620r.kicad_pcb
About the Esp32-620r PCB
Esp32-620r is an open source PCB design by carlonluca, published on GitHub. It is a 2-layer board measuring 57 × 68.5 mm, with 14 components from 9 distinct parts.
Other key parts include the L7805. By type, the board carries 5 capacitors, 3 connectors, 2 resistors, 1 IC, 1 transistor and 1 relay.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
A zigbee smart relay powered at 10VDC from a Elvox 831 power supply.
This is a PCB board designed in Kicad to control an the electric lock in a plant using the Elvox 620r and art. 831 power supply. You can power the PCB from the 10VDC from pins 3- and 6+ (see the datasheets) and using the cable from the electric lock.
Note that, despite the name, the micro used in the project is a ProMicro with a nrf52840 chip.
The provided firmware uses esphome. The setup in firmware uses zigbee and the pin P0.31 to control the lock.

Main components on the Esp32-620r
Esp32-620r bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | NPN | TO-92_Inline | Q1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J3 |
| 1 | Relay_SPDT | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | D_Schottky | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 4 | 0.1uF | C_Disc_D10.0mm_W2.5mm_P5.00mm | C0, C1, C3, C4 |
| 1 | 4.7uF | C_Disc_D10.0mm_W2.5mm_P5.00mm | C2 |
| 2 | R | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R2 |
Esp32-620r design files
The KiCad project lives in the carlonluca/esp32-620r repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/esp32-620r.kicad_pcb
- Schematickicad/esp32-620r.kicad_sch
Esp32-620r: common questions
How big is the Esp32-620r PCB?
The Esp32-620r measures 57 × 68.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-620r?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-620r design files?
From the carlonluca/esp32-620r repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-620r design in my own project?
The repository has no license, so all rights stay with carlonluca. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k