Isothermal

cellularmitosis·isothermal·kicad/isothermal.kicad_pcb

Isothermal PCB layout, top view — open source board by cellularmitosis

About the Isothermal PCB

Isothermal is an open source PCB design by cellularmitosis, published on GitHub under the MIT license. It is a 2-layer board measuring 62.2 × 49.9 mm, with 37 components from 20 distinct parts.

Other key parts include the LM324. By type, the board carries 15 resistors, 9 connectors, 9 capacitors, 1 IC, 1 transistor and 1 LED.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

An Arduino shield which regulates temperature.

An Arduino shield which regulates temperature. Originally, this was used to regulate the temperature of a Hammond 1590BB.

- schematic - gerber files - OSHPark link - EEVBlog discussion

The resistor values were chosen to map a 20C to 30C window onto (roughly) 0V to 3.3V.

See also this link for PID tuning and measurements of a similar design (based on MCP9701 rather than thermistors).

Isothermal, from the project README
From the project README

Main components on the Isothermal

Isothermal bill of materials (BOM)

37 components, 20 distinct parts.

QtyPartRefs
1
LM324
U1
1
2N3904
Q1
5
CONN_2X1
P10, P20, P40, P41, P60
1
CONN_6X1
P70
2
CONN_8X1
P71, P73
1
CONN_10X1
P72
1
LED
LED80
1
ZENER
D30
7
0.1uF
C11, C12, C13, C21, C23, C30, C44
1
10nF
C40
1
10uF
C60
3
10k
R11, R21, R42
4
33k
R13, R15, R23, R25
2
120k
R14, R24
1
100R
R30
1
330R
R31
1
1k
R40
1
0R
R41
1
100k
R44
1
470
R80

Isothermal design files

The KiCad project lives in the cellularmitosis/isothermal repository on GitHub; these links point at the commit this page was built from.

Isothermal: common questions

How big is the Isothermal PCB?

The Isothermal measures 62.2 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Isothermal?

37 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Isothermal design files?

From the cellularmitosis/isothermal repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Isothermal design in my own project?

Yes, under the terms of its MIT license, which cellularmitosis chose for the repository.

Similar boards