21 open source boards using the LM27762
Real designs built with the LM27762, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Main board
AllenNeuralDynamics
80 × 50 mm183 parts4LMIT5RP2040/RP2350
ECE342 USB Oscilliscope
elliotnash
100 × 43.5 mm141 parts4LNo license3Portable line mixer
sww1235
77.5 × 114.3 mm131 parts4LMIT3STM32
Link
oats-center
88.9 × 76.2 mm121 parts4LNo license3BitForge-SDR
HarrySkySon
100 × 85 mm332 parts6LCERN-OHL-S-2.01RP2040/RP2350
Feather
wolf-yuan-6115
61.4 × 38.8 mm137 parts4LGPL-3.01SYNTH
svenssonjoel
83 × 54 mm81 parts2LGPL-3.01Mini-4ch mixer
ArrestedLightning
81.9 × 64 mm80 parts2LCC-BY-4.01RP2040/RP2350
ADC pHAT AFE
kelu124
65 × 30 mm61 parts2LTAPR-OHL-1.01ESP32
Geist
ru3iks
80 × 80 mm46 parts2LMIT1RP2040/RP2350
Feather
wolf-yuan-6115
61.4 × 38.8 mm137 parts4LNo license0BalancedSurroundOut
samo4
45 × 62 mm58 parts2LNo license0Analog front end
AllenNeuralDynamics
61.5 × 21 mm54 parts4LMIT5PSU
TZeng0698
42.8 × 17.8 mm31 parts2LNo license3PSU
Blaze-Pascal
50 × 26 mm28 parts4LGPL-3.02RP2040/RP2350
Pumper
wolf-yuan-6115
33.8 × 93.1 mm90 parts4LGPL-3.01RP2040/RP2350
ADC pHAT AFE ADC10080
kelu124
65 × 30 mm59 parts2LTAPR-OHL-1.01Analog
TZeng0698
42.8 × 17.8 mm21 parts2LNo license3Dual Rail Eval Board
Cerybra
65 × 100 mm77 parts4LAGPL-3.00RP2040/RP2350
Source Controller
MECSEM
72 × 50 mm114 parts4LGPL-3.00Motherboard
oats-center
108 × 88.9 mm47 parts4LNo license3
How designs wire the LM27762
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the LM27762 connects to, and the resistors, capacitors and other passives placed on it.
- The FB+ pin has a resistor to GND on 16 of 16 designs, most often 51 kΩ (then 50 kΩ).
- The CP pin has a capacitor to GND on 16 of 16 designs, most often 4.7 µF (then 10 µF).
- The C- pin has a series capacitor on 16 of 16 designs, most often 1 µF (then 470 nF).
- The C+ pin has a series capacitor on 16 of 16 designs, most often 1 µF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PGOODpin 1 | Connected to: GND 81% | — |
| FB+pin 2 | Connected to: Signal 100% |
|
| VINpin 3 | Connected to: 5V 88% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| CPpin 5 | Connected to: Signal 100% |
|
| OUT-pin 6 | Connected to: -5V 75% · a signal 19% | — |
| FB-pin 7 | Connected to: Signal 100% |
|
| EN-pin 8 | Connected to: 5V 69% · a signal 31% | — |
| C-pin 9 | Connected to: Signal 100% |
|
| C+pin 10 | Connected to: Signal 100% |
|
| OUT+pin 11 | Connected to: 5V 81% · a signal 19% | — |
| EN+pin 12 | Connected to: 5V 69% · a signal 31% | — |
| PADpin 13 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog front end by AllenNeuralDynamics, ECE342 USB Oscilliscope by elliotnash, Link by oats-center and Portable line mixer by sww1235.
The LM27762 in open source designs
The gallery holds 21 open source boards using the LM27762 from 16 GitHub repositories; a typical one measures about 65 × 50 mm and carries around 80 components.
62% use four copper layers or more, and 67% carry an open source license.
The most starred is Main board by AllenNeuralDynamics.
Parts used alongside the LM27762
Microcontrollers on boards using the LM27762
What boards using the LM27762 are built for
LM27762: common questions
Where can I find a LM27762 reference design?
Each of the 21 boards on this page is a real design using the LM27762. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM27762 FB+ pin?
The FB+ pin has a resistor to GND on 16 of 16 designs, most often 51 kΩ (then 50 kΩ). Counted from the KiCad layouts of 16 open source designs using the LM27762.
How is the LM27762 CP pin connected?
The CP pin has a capacitor to GND on 16 of 16 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 16 open source designs using the LM27762.
How is the LM27762 C- pin connected?
The C- pin has a series capacitor on 16 of 16 designs, most often 1 µF (then 470 nF). Counted from the KiCad layouts of 16 open source designs using the LM27762.
What parts are used alongside the LM27762?
The OPA1612AXD, OPA1622, PCM5102A, RP2354A and TAD5242IRGER appear in the most repositories here.
Which microcontrollers do boards using the LM27762 use?
Most are built on RP2040/RP2350 (8), ESP32 (1) and STM32 (1).
How big is a typical board using the LM27762?
The median is 65 × 50 mm, and 38% are two-layer designs.
What is the most popular open source board using the LM27762?
By GitHub stars, Main board by AllenNeuralDynamics, with 5 stars.
Can I simulate one of these boards using the LM27762 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.