Nref batterypack backside
About the Nref batterypack backside PCB
Nref batterypack backside is an open source PCB design by cetola, published on GitHub. It is a 4-layer board measuring 75 × 17 mm, with 3 components from 3 distinct parts.
It belongs with the power & battery and audio designs in this gallery.
From the project
The original Open Hardware laptop, reloaded.
The original Open Hardware laptop, reloaded.
MNT Reform Next takes the MNT Reform family's modular approach a few steps further: The motherboard doesn't have any exterior ports, instead it breaks out all important signals in groups to FPC and JST-SH headers. The connectivity to the outside is implemented via user-exchangable Port Boards that increase repairability, customizability and future proofing of interfaces. The motherboard provides the system controller (RP2040 based), main (multi chemistry) LiFePO4/LiIon charger buck/boost controller, main 5V and 3V3 power rails and the SOM…
Nref batterypack backside bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2036-3-57-15-00-00-03-0 C1+ Mill-Max | Mill-Max_2036-X-57 | J1 |
| 1 | 2036-3-57-15-00-00-03-0 C3+ Mill-Max | Mill-Max_2036-X-57 | J3 |
| 1 | SM02B-SRSS-TB FRONT_CONN JST | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J5 |
Nref batterypack backside design files
The KiCad project lives in the cetola/reform-next-mirror repository on GitHub; these links point at the commit this page was built from.
Nref batterypack backside: common questions
How big is the Nref batterypack backside PCB?
The Nref batterypack backside measures 75 × 17 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Nref batterypack backside?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nref batterypack backside design files?
From the cetola/reform-next-mirror repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nref batterypack backside design in my own project?
The repository has no license, so all rights stay with cetola. Use it as a reference, and ask the author before reusing the design.
More boards in reform-next-mirror
RP2040/RP2350Nref motherboard
122.6 × 75.9 mm269 parts6LNo license0
Nref ports one
88 × 35.9 mm146 parts4LNo license0
Nref ports two
87.5 × 40.2 mm137 parts4LNo license0
Reform camera
46 × 46 mm114 parts4LNo license0
Hdmi edp2
43.5 × 32.5 mm93 parts4LNo license0
Nref batterypack
75 × 17 mm83 parts4LNo license0
Nref usb3-redriver
54.5 × 32 mm40 parts4LNo license0
Nref wifi m2
66 × 24 mm28 parts4LNo license0
Nref wifi
66 × 33 mm23 parts2LNo license0
Trackpad IQS9150
105.5 × 53.3 mm10 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k