MIDI-Keyboard

chahatesh·MIDI-Keyboard·Instrument/Instrument.kicad_pcb

MIDI-Keyboard PCB layout, top view — open source ESP32 board by chahatesh

About the MIDI-Keyboard PCB

MIDI-Keyboard is an open source ESP32 PCB design by chahatesh, published on GitHub under the MIT license. It is a 2-layer board measuring 96 × 72.5 mm, with 10 components from 5 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 diodes, 2 switches, 1 IC and 1 connector.

It belongs with the keyboards, audio and test & measurement designs in this gallery.

From the project

A keyboard

This is a custom-built MIDI keyboard that I designed using a PCB and electronic components. The goal of this project was to create a compact, customizable MIDI controller with different types of inputs, including capacitive touch keys, buttons, sliders, and rotary encoders.

The keyboard is designed to be assembled by soldering components onto a custom PCB and uploading the firmware to the microcontroller.

Main components on the MIDI-Keyboard

MIDI-Keyboard bill of materials (BOM)

10 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
CTB
J1
2
R_Potentiometer_MountingPin
RV2, RV3
2
SW_Push
SW1, SW2
4
SK6812MINI-E
D1, D2, D3, D4

MIDI-Keyboard design files

The KiCad project lives in the chahatesh/MIDI-Keyboard repository on GitHub; these links point at the commit this page was built from.

MIDI-Keyboard: common questions

What microcontroller does the MIDI-Keyboard use?

The MIDI-Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the MIDI-Keyboard PCB?

The MIDI-Keyboard measures 96 × 72.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MIDI-Keyboard?

10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MIDI-Keyboard design files?

From the chahatesh/MIDI-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MIDI-Keyboard design in my own project?

Yes, under the terms of its MIT license, which chahatesh chose for the repository.

Can I test firmware for the MIDI-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards