MP3-Player
chahatesh·MP3-Player
About the MP3-Player PCB
MP3-Player is an open source ESP32 PCB design by chahatesh, published on GitHub. It is a 2-layer board measuring 66 × 62.5 mm, with 7 components from 5 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 connectors, 1 IC and 1 resistor.
From the project
A little mp3 player that can play all your favorite songs
A small, custom MP3 player I designed using an ESP32-S3-Zero, DFPlayer Mini, TFT display, and a rotary encoder.
I wanted to make a simple music player becouse playing music on my phone is Data intensive. I designed the PCB in KiCad and also made a 3D-printable case for it.
The player uses a microSD card to store music, a rotary encoder to switch songs, and a small TFT display that shows the current song number and whether the music is playing or paused.
Main components on the MP3-Player
MP3-Player bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 3 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J1, J2, J3 |
| 1 | AudioJack3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | 1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
MP3-Player design files
The KiCad project lives in the chahatesh/MP3-Player repository on GitHub; these links point at the commit this page was built from.
- LayoutMP3-Player.kicad_pcb
- SchematicMP3-Player.kicad_sch
- BOMBOM.csv
MP3-Player: common questions
What microcontroller does the MP3-Player use?
The MP3-Player is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the MP3-Player PCB?
The MP3-Player measures 66 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MP3-Player?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MP3-Player design files?
From the chahatesh/MP3-Player repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MP3-Player design in my own project?
The repository has no license, so all rights stay with chahatesh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MP3-Player without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k