Usbc-7seg

cHemingway·usbc-7seg

Usbc-7seg PCB layout, top view — open source RISC-V board by cHemingway

About the Usbc-7seg PCB

Usbc-7seg is an open source RISC-V PCB design by cHemingway, published on GitHub. It is a 4-layer board measuring 32.8 × 15 mm, with 21 components from 13 distinct parts.

Its main chip is the CH32V203G6U6, from the RISC-V family. Other key parts include the GS2816CW-G and XC6206P332MR-G. By type, the board carries 7 capacitors, 4 ICs, 4 resistors, 2 transistors, 1 crystal and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

A tiny 7 segment display, USB controlled

Designed to be assembled by JLCPCB, using basic parts where possible

Uses a WCH CH32V203 micro as its small, cheap, has USB

Credit to Adafruit for the idea of hiding the programming pads on the other side of the USB-C connector

Main components on the Usbc-7seg

Usbc-7seg bill of materials (BOM)

21 components, 13 distinct parts.

QtyPartRefs
2
GS2816CW-G
U1, U2
1
CH32V203G6U6
U3
1
XC6206P332MR-G
U4
2
AO3400A
Q1, Q2
1
12MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
1
TS-1088-AR02016
SW1
1
GZ1608D601TF
FB1
2
4.7uF
C1, C2
3
100n
C3, C4, C7
2
12pF
C5, C6
2
5.1K
R1, R2
2
10K
R3, R4

Usbc-7seg design files

The KiCad project lives in the cHemingway/usbc-7seg repository on GitHub; these links point at the commit this page was built from.

Usbc-7seg: common questions

What microcontroller does the Usbc-7seg use?

The Usbc-7seg is built around the CH32V203G6U6, from the RISC-V family.

How big is the Usbc-7seg PCB?

The Usbc-7seg measures 32.8 × 15 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Usbc-7seg?

21 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usbc-7seg design files?

From the cHemingway/usbc-7seg repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usbc-7seg design in my own project?

The repository has no license, so all rights stay with cHemingway. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Usbc-7seg without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards