IoT-Environmental-Monitoring-System

Chethien1912·IoT-Environmental-Monitoring-System·PCB/IoT2526_HK2.kicad_pcb

IoT-Environmental-Monitoring-System PCB layout, top view — open source board by Chethien1912

About the IoT-Environmental-Monitoring-System PCB

IoT-Environmental-Monitoring-System is an open source PCB design by Chethien1912, published on GitHub under the MIT license. It is a 2-layer board measuring 99.4 × 99.3 mm, with 67 components from 32 distinct parts.

Other key parts include the RTC_DS3231M, EL357N-G, AMS1117 and DEVKIT_V1_ESP32-WROOM-32. By type, the board carries 21 resistors, 13 capacitors, 10 diodes, 7 ICs, 4 transistors and 4 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32-based IoT environmental monitoring project semester 2 2025-2026 HCMUTE

Hệ thống giám sát môi trường thời gian thực sử dụng ESP32, được thiết kế để đo và theo dõi các thông số nhiệt độ, độ ẩm, khí CO và khí NO2. Dự án kết hợp phần cứng nhúng, giao diện hiển thị tại thiết bị, backend lưu trữ dữ liệu và ứng dụng giám sát từ xa, phù hợp cho các mô hình phòng thí nghiệm, lớp học, nhà xưởng nhỏ hoặc khu vực cần cảnh báo chất lượng không khí cục bộ.

IoT-Environmental-Monitoring-System, from the project README
From the project README

Main components on the IoT-Environmental-Monitoring-System

IoT-Environmental-Monitoring-System bill of materials (BOM)

67 components, 32 distinct parts.

QtyPartRefs
1
RTC_DS3231M
IC1
3
EL357N-G
U1, U2, U3
1
AMS1117
U4
1
DEVKIT_V1_ESP32-WROOM-32
U5
1
~
U6
4
SI2300
Q1, Q2, Q3, Q4
1
CO
J1
1
NO2
J2
1
SHT31
J3
1
Screw_Terminal_01x05
J4
1
CR1220
BT1
1
Buzzer
BZ1
1
Fuse
F1
3
G5NB
K1, K2, K3
1
HLK-PM01
PS1
5
LED
D1, D2, D3, D8, D10
3
1N4007
D4, D5, D6
1
BZT52C5V1
D7
1
BAT54C
D9
1
10mH/UU9.8
L1
Show 12 more
QtyPartRefs
5
1uF
C1, C3, C4, C5, C11
5
100nF
C2, C6, C7, C8, C9
1
Tụ kẹo 100nF 275V
C10
1
10uF
C12
1
220uF
C13
5
10K/0603/1%
R1, R2, R3, R10, R11
10
10K
R4, R5, R6, R7, R8, R9, R12, R18 +2
1
R_Variable
R13
1
1K
R14
1
1K/0603/1%
R15
2
4.7K
R16, R17
1
100
R19

IoT-Environmental-Monitoring-System design files

The KiCad project lives in the Chethien1912/IoT-Environmental-Monitoring-System repository on GitHub; these links point at the commit this page was built from.

IoT-Environmental-Monitoring-System: common questions

How big is the IoT-Environmental-Monitoring-System PCB?

The IoT-Environmental-Monitoring-System measures 99.4 × 99.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IoT-Environmental-Monitoring-System?

67 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the IoT-Environmental-Monitoring-System design files?

From the Chethien1912/IoT-Environmental-Monitoring-System repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IoT-Environmental-Monitoring-System design in my own project?

Yes, under the terms of its MIT license, which Chethien1912 chose for the repository.

Similar boards