5 open source boards using the RTC_DS3231M
Real designs built with the RTC_DS3231M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Clean room slave
trieuhuyduc
165 × 110 mm207 parts2LNo license1ESP32
Smart air
meeTeam05
100 × 100 mm62 parts2LMIT1ESP32
Kicad example
nguyentrungthao
120.9 × 119 mm126 parts2LNo license0IoT-Environmental-Monitoring-System
Chethien1912
99.4 × 99.3 mm67 parts2LMIT0ESP32
Blockchain iot
meeTeam05
100 × 100 mm62 parts2LMIT0
How designs wire the RTC_DS3231M
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RTC_DS3231M connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ.
- The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ.
- The 32KHZ pin is left unconnected on 5 of 5 designs.
- The INT/SQW pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 32KHZpin 1 | Connected to: Not connected 100% | — |
| VCCpin 2 | Connected to: 3.3V 100% |
|
| INT/SQWpin 3 | Connected to: Not connected 100% | — |
| RSTpin 4 | Connected to: Not connected 100% | — |
| GNDpin 5, 6, 7, 8, 9, 10, 11, 12, 13 | Connected to: GND 100% | — |
| SDApin 15 | Connected to: A connector 100%, the microcontroller 80% |
|
| SCLpin 16 | Connected to: A connector 100%, the microcontroller 80% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smart air by meeTeam05, Clean room slave by trieuhuyduc, IoT-Environmental-Monitoring-System by Chethien1912 and Blockchain iot by meeTeam05.
The RTC_DS3231M in open source designs
The gallery holds 5 open source boards using the RTC_DS3231M from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 67 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Clean room slave by trieuhuyduc.
Parts used alongside the RTC_DS3231M
Microcontrollers on boards using the RTC_DS3231M
What boards using the RTC_DS3231M are built for
RTC_DS3231M: common questions
Where can I find a RTC_DS3231M reference design?
Each of the 5 boards on this page is a real design using the RTC_DS3231M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the RTC_DS3231M SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the RTC_DS3231M.
What pull-up resistor is used on the RTC_DS3231M SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the RTC_DS3231M.
How is the RTC_DS3231M 32KHZ pin connected?
The 32KHZ pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RTC_DS3231M.
What parts are used alongside the RTC_DS3231M?
The AMS1117, EL357N-G and ESP32-S3-DevKitC appear in the most repositories here.
Which microcontrollers do boards using the RTC_DS3231M use?
Most are built on ESP32 (4).
How big is a typical board using the RTC_DS3231M?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the RTC_DS3231M?
By GitHub stars, Clean room slave by trieuhuyduc, with 1 stars.
Can I simulate one of these boards using the RTC_DS3231M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.